Caldera’s PrintLab includes a Backlit Printing replay. This independent selection helps print and sign shops compare the LED light source behind their finished graphics. Choose the bar model and white-light range before approving a production lightbox.
Keep the intended display light consistent
Compare the same printed face with the same frame depth, bar positions and ambient light. When the lighting specification changes, reassess the finished graphic with your print provider. Our LED bars supply display illumination; they are not a colour-measurement instrument or RIP profile.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Is a 6500K LED module automatically a calibrated D65 light source?
No. D65 specifies a spectral distribution, not just a colour-temperature label. The featured commercial bars have published CCT ranges; a cool-white option is not evidence of calibrated D65 conformity. For a controlled proofing requirement, request the required measurement and source specification separately. CIE · IES
Which cool-white lightbox bar should I request?
The 20W rigid, 12W/18W MODULAP and 7W compact bars list 6500–7000K options; the linkable family lists 6000–7200K. Request the exact model and fixed range used in your accepted sample. Do not treat those ranges as identical or mix replacements by wattage alone.
Will a higher-wattage bar correct a printed colour mismatch?
Not necessarily. Compare colour appearance separately from brightness and visible light bands. Keep the approved model, CCT, print material and layout consistent. Send a sample reference, internal dimensions and current LED specifications for a component quotation; print-profile adjustment remains with your print provider.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
Side-Lit LED Module for MODULAP Systems -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Caldera’s PrintLab includes a Backlit Printing replay. This independent selection helps print and sign shops compare the LED light source behind their finished graphics. Choose the bar model and white-light range before approving a production lightbox.
Keep the intended display light consistent
Compare the same printed face with the same frame depth, bar positions and ambient light. When the lighting specification changes, reassess the finished graphic with your print provider. Our LED bars supply display illumination; they are not a colour-measurement instrument or RIP profile.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Is a 6500K LED module automatically a calibrated D65 light source?
No. D65 specifies a spectral distribution, not just a colour-temperature label. The featured commercial bars have published CCT ranges; a cool-white option is not evidence of calibrated D65 conformity. For a controlled proofing requirement, request the required measurement and source specification separately. CIE · IES
Which cool-white lightbox bar should I request?
The 20W rigid, 12W/18W MODULAP and 7W compact bars list 6500–7000K options; the linkable family lists 6000–7200K. Request the exact model and fixed range used in your accepted sample. Do not treat those ranges as identical or mix replacements by wattage alone.
Will a higher-wattage bar correct a printed colour mismatch?
Not necessarily. Compare colour appearance separately from brightness and visible light bands. Keep the approved model, CCT, print material and layout consistent. Send a sample reference, internal dimensions and current LED specifications for a component quotation; print-profile adjustment remains with your print provider.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.