Looking for Beauty Expo Australia lightbox LED modules? The installer’s beauty-brand case distinguishes backlit graphics from illuminated shelving. Compare sources for your own printed packaging or brand image.
How should I test fine printed packaging details?
Use the actual backlit print, including small labels, pale areas and dark outlines. Test a full-size section at the intended viewing distance with the proposed frame and LEDs. A bright open source alone does not show how the printed detail will appear.
Do lightbox LEDs replace separate product-shelf lighting?
No. These modules illuminate the printed face inside a specified lightbox. Actual bottles, jars and reflective packaging on a shelf need their own lighting assessment. A printed product image and the real product are different surfaces.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for lightbox source selection?
Send the frame section, usable depth, print material and packaging-image sample, plus intended supply. CRI alone does not guarantee a printed colour match. No fit in the installer’s frames or permission to change supplied LEDs is claimed.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with the printed packaging sample and lightbox dimensions to compare sources for your brand graphic.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for Beauty Expo Australia lightbox LED modules? The installer’s beauty-brand case distinguishes backlit graphics from illuminated shelving. Compare sources for your own printed packaging or brand image.
How should I test fine printed packaging details?
Use the actual backlit print, including small labels, pale areas and dark outlines. Test a full-size section at the intended viewing distance with the proposed frame and LEDs. A bright open source alone does not show how the printed detail will appear.
Do lightbox LEDs replace separate product-shelf lighting?
No. These modules illuminate the printed face inside a specified lightbox. Actual bottles, jars and reflective packaging on a shelf need their own lighting assessment. A printed product image and the real product are different surfaces.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for lightbox source selection?
Send the frame section, usable depth, print material and packaging-image sample, plus intended supply. CRI alone does not guarantee a printed colour match. No fit in the installer’s frames or permission to change supplied LEDs is claimed.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with the printed packaging sample and lightbox dimensions to compare sources for your brand graphic.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.