Looking for Australian Manufacturing Week SEG lightbox LEDs? A supplier documents fabric lightboxes around an exhibitor’s demonstration space. Compare independent modules for your own indoor backwalls and plan their power separately from demo equipment.
Can one LED power supply run several lightbox panels?
Only if the selected LEDs, driver capacity and wiring arrangement support that design. Calculate the combined LED load, follow the driver maker’s capacity guidance and verify cable and connector limits. Physical frame connections do not prove electrical linking compatibility.
Should I copy the demonstration equipment’s power arrangement for the lightboxes?
No. Specify the LED driver from the selected modules’ input requirements and load. Give the venue electrician separate lightbox and demo-equipment requirements, including driver placement and access; do not treat booth mains as a direct module input.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these plug-in complete SEG lightbox kits?
They are internal light-source components. Confirm the driver, cables, frame and printed face needed for your own build. No direct fit or approved replacement for the supplier’s display is claimed.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the number of panels, their internal dimensions, proposed LED quantities and driver layout through Contact us to compare sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for Australian Manufacturing Week SEG lightbox LEDs? A supplier documents fabric lightboxes around an exhibitor’s demonstration space. Compare independent modules for your own indoor backwalls and plan their power separately from demo equipment.
Can one LED power supply run several lightbox panels?
Only if the selected LEDs, driver capacity and wiring arrangement support that design. Calculate the combined LED load, follow the driver maker’s capacity guidance and verify cable and connector limits. Physical frame connections do not prove electrical linking compatibility.
Should I copy the demonstration equipment’s power arrangement for the lightboxes?
No. Specify the LED driver from the selected modules’ input requirements and load. Give the venue electrician separate lightbox and demo-equipment requirements, including driver placement and access; do not treat booth mains as a direct module input.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these plug-in complete SEG lightbox kits?
They are internal light-source components. Confirm the driver, cables, frame and printed face needed for your own build. No direct fit or approved replacement for the supplier’s display is claimed.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the number of panels, their internal dimensions, proposed LED quantities and driver layout through Contact us to compare sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.