Building an ALLFORPACK backlit canvas wall or a separate exhibition lightbox? This selection helps stand builders compare internal LED modules for custom printed graphics and compatible replacement work.
Separate the wall covering from the lightbox assembly
Record each illuminated wall and individual lightbox separately. A fabric-covered partition alone does not tell you whether its graphic is translucent or whether a lighting cavity exists. For a supplied stand package, first ask which lighting is included before ordering extra components.
Compare LED bars for the lightbox compartment
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Which LED modules should I choose for a backlit canvas wall?
Compare bar length, mounting clearance and the actual printed face. Test the proposed layout at the intended cavity depth before repeating it across the wall; booth floor area does not determine the required module quantity.
Does the stand power allowance replace a DC24V LED driver?
No. Confirm the input and output ratings of the selected external constant-voltage driver, the total module load and connector polarity. A stand electricity allowance does not establish the voltage supplied to an LED bar.
What information is needed for a custom lightbox quote?
Send separate wall and box drawings, usable internal dimensions, translucent print samples, connector photos and driver labels. Identify supplied lighting and the components you are replacing so the order matches the actual build.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W/18W LED Module for MODULAP Fabric Lightbox -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
Side-Lit LED Module for MODULAP Systems -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Building an ALLFORPACK backlit canvas wall or a separate exhibition lightbox? This selection helps stand builders compare internal LED modules for custom printed graphics and compatible replacement work.
Separate the wall covering from the lightbox assembly
Record each illuminated wall and individual lightbox separately. A fabric-covered partition alone does not tell you whether its graphic is translucent or whether a lighting cavity exists. For a supplied stand package, first ask which lighting is included before ordering extra components.
Compare LED bars for the lightbox compartment
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Which LED modules should I choose for a backlit canvas wall?
Compare bar length, mounting clearance and the actual printed face. Test the proposed layout at the intended cavity depth before repeating it across the wall; booth floor area does not determine the required module quantity.
Does the stand power allowance replace a DC24V LED driver?
No. Confirm the input and output ratings of the selected external constant-voltage driver, the total module load and connector polarity. A stand electricity allowance does not establish the voltage supplied to an LED bar.
What information is needed for a custom lightbox quote?
Send separate wall and box drawings, usable internal dimensions, translucent print samples, connector photos and driver labels. Identify supplied lighting and the components you are replacing so the order matches the actual build.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.