Searching for Aircraft Interiors Expo lightbox LED modules or AIX LED bars for printed exhibition graphics? Compare internal sources when planning a narrow stand display beside a meeting room or demonstration zone.
How do I light graphics along a long, narrow exhibition footprint?
Divide the proposed lightbox run into its actual framed sections. Match bar length and optics to each section’s internal depth and mounting space; do not choose quantities from the overall stand width alone. Test the joins between prints as well as the centers. A bright panel beside a dim panel can break the appearance of a continuous brand graphic.
Can the graphic remain clear without restricting meeting-room access?
Check the print from close passing positions and the intended approach angle. Keep the entrance, demonstration movement and servicing route available when positioning the enclosures. Coordinate graphic removal, driver access and disconnection with the room layout. Test the final printed faces and their brightness balance together rather than approving separate panels in isolation.
Compare LED lightbox sources
- 20W rigid edge-lit bar: DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics.
- 10W slim edge-lit bar: DC24V, 360×23×16mm including lens, 1100lm, 9°×50° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
Are these LED modules suitable for installation inside an aircraft cabin?
This selection concerns exhibition graphic lightboxes. Aircraft cabin equipment requires its own engineering and approvals; exhibit use does not establish airworthiness or onboard compatibility. For the display, verify each selected model’s voltage, connector, polarity and run limit, then calculate section loads and driver headroom without assuming all catalog items can be linked together.
Before ordering
Confirm usable depths, mounting spans, print transmission and service access. A compatible external driver is needed. No fit in an existing modular stand or aviation system is implied; check the actual enclosure and electrical configuration.
Browse all 26 LED Modules below. Send the framed sections, joint details, meeting-room entrance and print samples for a component selection enquiry.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Searching for Aircraft Interiors Expo lightbox LED modules or AIX LED bars for printed exhibition graphics? Compare internal sources when planning a narrow stand display beside a meeting room or demonstration zone.
How do I light graphics along a long, narrow exhibition footprint?
Divide the proposed lightbox run into its actual framed sections. Match bar length and optics to each section’s internal depth and mounting space; do not choose quantities from the overall stand width alone. Test the joins between prints as well as the centers. A bright panel beside a dim panel can break the appearance of a continuous brand graphic.
Can the graphic remain clear without restricting meeting-room access?
Check the print from close passing positions and the intended approach angle. Keep the entrance, demonstration movement and servicing route available when positioning the enclosures. Coordinate graphic removal, driver access and disconnection with the room layout. Test the final printed faces and their brightness balance together rather than approving separate panels in isolation.
Compare LED lightbox sources
- 20W rigid edge-lit bar: DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics.
- 10W slim edge-lit bar: DC24V, 360×23×16mm including lens, 1100lm, 9°×50° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
Are these LED modules suitable for installation inside an aircraft cabin?
This selection concerns exhibition graphic lightboxes. Aircraft cabin equipment requires its own engineering and approvals; exhibit use does not establish airworthiness or onboard compatibility. For the display, verify each selected model’s voltage, connector, polarity and run limit, then calculate section loads and driver headroom without assuming all catalog items can be linked together.
Before ordering
Confirm usable depths, mounting spans, print transmission and service access. A compatible external driver is needed. No fit in an existing modular stand or aviation system is implied; check the actual enclosure and electrical configuration.
Browse all 26 LED Modules below. Send the framed sections, joint details, meeting-room entrance and print samples for a component selection enquiry.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.