Agfa invites customers to tailored inkjet demonstrations with their own files, and its ink guidance includes backlit graphics. This independent guide is for sign makers selecting internal LED modules when their backlit face specification includes a laminate or protective coating.
Approve the finished face before ordering the light source
Label the printed substrate and each finishing layer. Compare an unfinished reference and the specified finished sample with the same cabinet depth, LED positions, power supply and viewing conditions. Judge transmitted light, haze, visible texture and readability on the finished sample; a reflected-light print inspection is a separate check.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Will a laminate determine how many LED bars I need?
No universal bar count follows from a laminate name. Test the actual finished face in the intended enclosure. A finish can change the observed transmission or texture; simply adding brighter bars may not correct a poorly transmitting face. Record the approved bar model, positions and face-to-source distance.
Should I change the LED colour temperature while comparing finishes?
Keep the light source and its setting fixed while comparing finishes, so two variables are not changed together. After choosing the face construction, compare the required white-light options separately and repeat approval of the complete assembly at the selected setting.
Does a durable printed face make these modules suitable outdoors?
No. Ink durability or a face coating does not establish the LED module, driver, connector or enclosure protection rating. The featured 20W IP20 model is for indoor use. An outdoor assembly needs separately verified components and enclosure design; this collection does not establish outdoor suitability.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
Side-Lit LED Module for MODULAP Systems -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Agfa invites customers to tailored inkjet demonstrations with their own files, and its ink guidance includes backlit graphics. This independent guide is for sign makers selecting internal LED modules when their backlit face specification includes a laminate or protective coating.
Approve the finished face before ordering the light source
Label the printed substrate and each finishing layer. Compare an unfinished reference and the specified finished sample with the same cabinet depth, LED positions, power supply and viewing conditions. Judge transmitted light, haze, visible texture and readability on the finished sample; a reflected-light print inspection is a separate check.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Will a laminate determine how many LED bars I need?
No universal bar count follows from a laminate name. Test the actual finished face in the intended enclosure. A finish can change the observed transmission or texture; simply adding brighter bars may not correct a poorly transmitting face. Record the approved bar model, positions and face-to-source distance.
Should I change the LED colour temperature while comparing finishes?
Keep the light source and its setting fixed while comparing finishes, so two variables are not changed together. After choosing the face construction, compare the required white-light options separately and repeat approval of the complete assembly at the selected setting.
Does a durable printed face make these modules suitable outdoors?
No. Ink durability or a face coating does not establish the LED module, driver, connector or enclosure protection rating. The featured 20W IP20 model is for indoor use. An outdoor assembly needs separately verified components and enclosure design; this collection does not establish outdoor suitability.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.