Looking for AfMA Summit fabric lightbox LEDs? A supplier documents an exhibitor reusing SEG frames with new graphics. Compare independent internal modules for your own reusable display and assess each printed face with its light source.
Do I need new LEDs whenever I replace the fabric graphic?
Not automatically. If the frame, electrical requirements and lighting arrangement remain suitable, assess the new print with the existing source first. A new graphic alone does not establish a need to replace functioning LEDs.
Why can a new backlit graphic look dimmer with the same LEDs?
Different print media, ink coverage and graphic colours can transmit light differently. Compare the actual new print in the assembled box before changing module output or spacing; check the illuminated image, not the bare LED alone.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these modules vehicle lights for fleet equipment?
These selections concern indoor printed-lightbox illumination. No vehicle, road-use or equipment-lighting approval is claimed. Verify the selected module’s requirements for your own display construction.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your new backlit fabric, frame depth and current LED layout through Contact us to compare suitable lightbox sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for AfMA Summit fabric lightbox LEDs? A supplier documents an exhibitor reusing SEG frames with new graphics. Compare independent internal modules for your own reusable display and assess each printed face with its light source.
Do I need new LEDs whenever I replace the fabric graphic?
Not automatically. If the frame, electrical requirements and lighting arrangement remain suitable, assess the new print with the existing source first. A new graphic alone does not establish a need to replace functioning LEDs.
Why can a new backlit graphic look dimmer with the same LEDs?
Different print media, ink coverage and graphic colours can transmit light differently. Compare the actual new print in the assembled box before changing module output or spacing; check the illuminated image, not the bare LED alone.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these modules vehicle lights for fleet equipment?
These selections concern indoor printed-lightbox illumination. No vehicle, road-use or equipment-lighting approval is claimed. Verify the selected module’s requirements for your own display construction.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your new backlit fabric, frame depth and current LED layout through Contact us to compare suitable lightbox sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.