Picking up a fabric lightbox from 6ix Signs? Its lightbox page describes showroom pickup with setup instruction. Compare independent internal LEDs for your own design and confirm supplier services directly.
Can pull-over fabric and SEG lightboxes use the same LED layout?
Do not assume so. A fabric sleeve and a graphic tucked into a frame can have different internal spacing and obstructions. Compare the actual construction, light direction and printed material before selecting bars.
How should I record wiring before dismantling a portable lightbox?
Disconnect the supply first. Photograph connector positions and label matching leads, polarity and bar locations according to the maker’s instructions. Keep records with the display so reassembly follows the verified layout.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does showroom setup instruction confirm compatibility with these modules?
No. Supplier instruction concerns its supplied display. For an independent build, check the selected LED’s supply, connectors, polarity and mounting; no retrofit approval or supplier affiliation is claimed.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your sleeve or SEG frame construction, internal dimensions and connector photos through Contact us to compare sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Picking up a fabric lightbox from 6ix Signs? Its lightbox page describes showroom pickup with setup instruction. Compare independent internal LEDs for your own design and confirm supplier services directly.
Can pull-over fabric and SEG lightboxes use the same LED layout?
Do not assume so. A fabric sleeve and a graphic tucked into a frame can have different internal spacing and obstructions. Compare the actual construction, light direction and printed material before selecting bars.
How should I record wiring before dismantling a portable lightbox?
Disconnect the supply first. Photograph connector positions and label matching leads, polarity and bar locations according to the maker’s instructions. Keep records with the display so reassembly follows the verified layout.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does showroom setup instruction confirm compatibility with these modules?
No. Supplier instruction concerns its supplied display. For an independent build, check the selected LED’s supply, connectors, polarity and mounting; no retrofit approval or supplier affiliation is claimed.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your sleeve or SEG frame construction, internal dimensions and connector photos through Contact us to compare sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.