Visual Impact serves Australia’s sign, print and display trade. For workshops assessing an existing fabric lightbox, this collection brings together internal LED bars for a measured retrofit trial instead of assuming a new bar is a direct replacement.
Document the existing cabinet before choosing replacement LEDs
Record the frame’s internal depth, mounting surfaces, bar length, connector and power-supply label. Keep a reference print to compare the old and proposed lighting. A similar-looking plug does not establish the correct polarity or electrical match. Have the existing supply and wiring checked before a replacement trial; these products use DC24V and require compatible components.
Compare one converted frame before extending the retrofit
Build one trial using the selected LED model and fixed color temperature. Inspect corners, the center and the graphic at the normal viewing distance. Check mounting clearance, cable reach and access for future replacement. Different lenses and output levels can change the required layout, so retain the approved drawing rather than copying the old spacing automatically. Match the light source across one cabinet.
Compare internal LED lightbox sources
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Can I keep the existing frame and driver?
Possibly, after a fit and electrical assessment. The frame must provide suitable space and mounting, and the driver must match the DC24V load and installation conditions. No compatibility with an unidentified frame or supply is implied. Test the chosen build before ordering parts for several signs.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
12W/18W LED Module for MODULAP Fabric Lightbox -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
Flexible LED Stone Backlight Panel – 480×240mm, 24W/48W -
FOGA SYSTEM 10W LED Module – Edge-Lit Lightbox Bar -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
Side-Lit LED Module for MODULAP Systems -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens
Visual Impact serves Australia’s sign, print and display trade. For workshops assessing an existing fabric lightbox, this collection brings together internal LED bars for a measured retrofit trial instead of assuming a new bar is a direct replacement.
Document the existing cabinet before choosing replacement LEDs
Record the frame’s internal depth, mounting surfaces, bar length, connector and power-supply label. Keep a reference print to compare the old and proposed lighting. A similar-looking plug does not establish the correct polarity or electrical match. Have the existing supply and wiring checked before a replacement trial; these products use DC24V and require compatible components.
Compare one converted frame before extending the retrofit
Build one trial using the selected LED model and fixed color temperature. Inspect corners, the center and the graphic at the normal viewing distance. Check mounting clearance, cable reach and access for future replacement. Different lenses and output levels can change the required layout, so retain the approved drawing rather than copying the old spacing automatically. Match the light source across one cabinet.
Compare internal LED lightbox sources
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Can I keep the existing frame and driver?
Possibly, after a fit and electrical assessment. The frame must provide suitable space and mounting, and the driver must match the DC24V load and installation conditions. No compatibility with an unidentified frame or supply is implied. Test the chosen build before ordering parts for several signs.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.