SIGN Malaysia includes illuminated graphics, sign makers and display suppliers. For indoor printed-graphic lightboxes, record the visible aperture and frame-obscured border before placing internal sources. Browse all LED Modules below.
Measure the visible face separately from the outer frame
Mark the visible graphic opening, opaque border, braces and intended bar positions on a frame section and face drawing. Outer dimensions do not describe the whole illuminated aperture. Confirm where the frame conceals the graphic and where mounting parts may obstruct the light path.
Review the border with the intended graphic and frame
After qualified assembly and wiring checks, compare the finished illuminated face with the intended material. Review both the centre and the visible perimeter under agreed conditions. Bar wattage alone cannot guarantee a shadow-free border; graphics, optics and frame obstructions can affect the result.
Compare LED lightbox sources
- 7W mini edge-lit bar: 200×23×16mm, DC24V, 770lm and standard 20°×60° optics; verify available mounting and removal space.
- 10W DC-plug edge-lit bar: 360×26×16mm including lens, DC24V, 1000lm ±10%, 15°×45° optics and dual-end DC sockets.
- Aluminum-profile edge-lit family: 22W/25W/32W, DC24V, 40.7×17mm housing and 14°×47° optics; specify length and wire exit.
Can outer frame size alone determine the LED layout?
No. The visible opening, obscured border, internal supports and graphic material also matter. Use the actual frame drawing and a finished sample before accepting the source arrangement.
Before ordering
These are internal light sources, not complete retail fixtures. Disconnect power before service. Verify DC24V, load, connector pinout and polarity; confirm power and hardware separately. The featured 10W DC-plug bar permits at most 6 per run after wiring checks. Do not transfer the limit to other models.
Send outer and visible dimensions, frame section, border and brace positions, graphic material, proposed LED model and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
Flexible LED Stone Backlight Panel – 480×240mm, 24W/48W -
FOGA SYSTEM 10W LED Module – Edge-Lit Lightbox Bar -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
Side-Lit LED Module for MODULAP Systems -
12W/18W LED Module for MODULAP Fabric Lightbox -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens
SIGN Malaysia includes illuminated graphics, sign makers and display suppliers. For indoor printed-graphic lightboxes, record the visible aperture and frame-obscured border before placing internal sources. Browse all LED Modules below.
Measure the visible face separately from the outer frame
Mark the visible graphic opening, opaque border, braces and intended bar positions on a frame section and face drawing. Outer dimensions do not describe the whole illuminated aperture. Confirm where the frame conceals the graphic and where mounting parts may obstruct the light path.
Review the border with the intended graphic and frame
After qualified assembly and wiring checks, compare the finished illuminated face with the intended material. Review both the centre and the visible perimeter under agreed conditions. Bar wattage alone cannot guarantee a shadow-free border; graphics, optics and frame obstructions can affect the result.
Compare LED lightbox sources
- 7W mini edge-lit bar: 200×23×16mm, DC24V, 770lm and standard 20°×60° optics; verify available mounting and removal space.
- 10W DC-plug edge-lit bar: 360×26×16mm including lens, DC24V, 1000lm ±10%, 15°×45° optics and dual-end DC sockets.
- Aluminum-profile edge-lit family: 22W/25W/32W, DC24V, 40.7×17mm housing and 14°×47° optics; specify length and wire exit.
Can outer frame size alone determine the LED layout?
No. The visible opening, obscured border, internal supports and graphic material also matter. Use the actual frame drawing and a finished sample before accepting the source arrangement.
Before ordering
These are internal light sources, not complete retail fixtures. Disconnect power before service. Verify DC24V, load, connector pinout and polarity; confirm power and hardware separately. The featured 10W DC-plug bar permits at most 6 per run after wiring checks. Do not transfer the limit to other models.
Send outer and visible dimensions, frame section, border and brace positions, graphic material, proposed LED model and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.