RetailShow covers store design, shop fittings, lighting and displays. Choose internal LED components for fixture-integrated lightboxes, then check visibility with the merchandise in place. Browse the full LED Modules range below.
Check the graphic from the customer route
Mark the intended viewing positions on the aisle plan. Assemble shelves, stocked merchandise and adjacent fixtures before reviewing the illuminated graphic. Note hidden text, reflections and shelf shadows. Moving the internal LED source cannot make a physically obstructed message visible.
Fit the lighting around the fixture section
Confirm the illuminated opening, module clearance and cable route beside shelf supports. The profile family uses a 40.7mm-wide, 17mm-high housing; its standard 32cm lead exits at the left end on the bottom side. Confirm a different exit before ordering, and trial the final section before making repeat units.
Compare LED lightbox sources
- 7W mini edge-lit bar: 200×23×16mm, DC24V, 770lm and standard 20°×60° optics; verify available mounting and removal space.
- 10W DC-plug edge-lit bar: 360×26×16mm including lens, DC24V, 1000lm ±10%, 15°×45° optics and dual-end DC sockets.
- Aluminum-profile edge-lit family: 22W/25W/32W, DC24V, 40.7×17mm housing and 14°×47° optics; specify length and wire exit.
Will a higher-wattage module solve a shelf obstruction?
No. First change the graphic placement or fixture layout so the message can be seen. Then evaluate illumination, reflections and the selected module in the revised assembly.
Before ordering
These are internal light sources, not complete retail fixtures. Disconnect power before service. Verify DC24V, load, connector pinout and polarity; confirm power and hardware separately. The featured 10W DC-plug bar permits at most 6 per run after wiring checks. Do not transfer the limit to other models.
Send the aisle plan, stocked-fixture photos, illuminated opening, frame section, cable route and quantity through our contact page for component selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
Flexible LED Stone Backlight Panel – 480×240mm, 24W/48W -
FOGA SYSTEM 10W LED Module – Edge-Lit Lightbox Bar -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
Side-Lit LED Module for MODULAP Systems -
12W/18W LED Module for MODULAP Fabric Lightbox -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens
RetailShow covers store design, shop fittings, lighting and displays. Choose internal LED components for fixture-integrated lightboxes, then check visibility with the merchandise in place. Browse the full LED Modules range below.
Check the graphic from the customer route
Mark the intended viewing positions on the aisle plan. Assemble shelves, stocked merchandise and adjacent fixtures before reviewing the illuminated graphic. Note hidden text, reflections and shelf shadows. Moving the internal LED source cannot make a physically obstructed message visible.
Fit the lighting around the fixture section
Confirm the illuminated opening, module clearance and cable route beside shelf supports. The profile family uses a 40.7mm-wide, 17mm-high housing; its standard 32cm lead exits at the left end on the bottom side. Confirm a different exit before ordering, and trial the final section before making repeat units.
Compare LED lightbox sources
- 7W mini edge-lit bar: 200×23×16mm, DC24V, 770lm and standard 20°×60° optics; verify available mounting and removal space.
- 10W DC-plug edge-lit bar: 360×26×16mm including lens, DC24V, 1000lm ±10%, 15°×45° optics and dual-end DC sockets.
- Aluminum-profile edge-lit family: 22W/25W/32W, DC24V, 40.7×17mm housing and 14°×47° optics; specify length and wire exit.
Will a higher-wattage module solve a shelf obstruction?
No. First change the graphic placement or fixture layout so the message can be seen. Then evaluate illumination, reflections and the selected module in the revised assembly.
Before ordering
These are internal light sources, not complete retail fixtures. Disconnect power before service. Verify DC24V, load, connector pinout and polarity; confirm power and hardware separately. The featured 10W DC-plug bar permits at most 6 per run after wiring checks. Do not transfer the limit to other models.
Send the aisle plan, stocked-fixture photos, illuminated opening, frame section, cable route and quantity through our contact page for component selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.