FESPA Mexico includes lightboxes and signage alongside specialist printing. Compare internal LED sources using actual translucent print samples and the frame each material requires. Browse all LED Modules below.
Test the printed material rather than its name
Record the substrate, print process and ink coverage for each sample. Inspect bright areas, dense printed regions and visible source patterns with the graphic fitted. Do not assume every textile, acrylic panel or film is suitable for backlit use or for the same mounting method.
Record material changes separately from lighting changes
When a different material needs a different frame or mounting arrangement, document that change as well. Keep the LED setting recorded for each trial. The dual-CCT bar is direct backlighting and needs separate compatible control. Approve the full sample before repeat fabrication.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Will the same print file look identical on different illuminated materials?
Not necessarily. Material transmission, printing and mounting affect the result. Compare physical illuminated samples under agreed conditions rather than selecting components from the artwork file alone.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the printed samples, substrate details, frame sections, comparison photos, LED layout and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
Flexible LED Stone Backlight Panel – 480×240mm, 24W/48W -
FOGA SYSTEM 10W LED Module – Edge-Lit Lightbox Bar -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
Side-Lit LED Module for MODULAP Systems -
12W/18W LED Module for MODULAP Fabric Lightbox -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens
FESPA Mexico includes lightboxes and signage alongside specialist printing. Compare internal LED sources using actual translucent print samples and the frame each material requires. Browse all LED Modules below.
Test the printed material rather than its name
Record the substrate, print process and ink coverage for each sample. Inspect bright areas, dense printed regions and visible source patterns with the graphic fitted. Do not assume every textile, acrylic panel or film is suitable for backlit use or for the same mounting method.
Record material changes separately from lighting changes
When a different material needs a different frame or mounting arrangement, document that change as well. Keep the LED setting recorded for each trial. The dual-CCT bar is direct backlighting and needs separate compatible control. Approve the full sample before repeat fabrication.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Will the same print file look identical on different illuminated materials?
Not necessarily. Material transmission, printing and mounting affect the result. Compare physical illuminated samples under agreed conditions rather than selecting components from the artwork file alone.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the printed samples, substrate details, frame sections, comparison photos, LED layout and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.