European Sign Expo serves signage and visual-communication buyers. For a double-sided indoor sign cabinet, review both illuminated faces before selecting internal LED modules. Browse the full LED Modules range below.
Inspect each face in the assembled cabinet
Fit both final graphics and any planned internal divider. Check the illuminated faces separately from their intended viewing positions. Mounting brackets, cable routes and the second graphic can affect the usable optical layout; one approved face does not approve the other.
Specify the lens and mounting direction together
Record which way each bar faces and its exact lens option. The featured 7W side-lit module uses a standard 9°×50° lens; other stated angles require confirmation by request. Do not assume one perimeter arrangement will light both faces uniformly. Test before fixing production quantities.
Compare LED lightbox sources
- 7W side-lit optical module: DC24V, 770lm ±10%, standard 9°×50° lens and 2-pin connection; verify fixing-hole shape.
- Edge-lit length family: 3.5W/7W/21W, DC24V, 170/370/965mm and 10°×60° lens; select the exact length variant.
- Linkable edge-lit family: 9W/14W/20W, DC24V, 212/319/480mm and standard 20°×60° optics; verify the selected model.
Can a single-face layout be copied into a double-sided cabinet?
Only after checking the actual two-face construction. Review separation, depth and obstructions, then inspect both graphics. A published bar output is not a measured brightness value for either finished face.
Before ordering
These are internal sources, not finished double-sided signs. Verify DC24V, load, connector pinout and polarity. The featured 7W optical module has a ceiling of 8 per run; the linkable family has a separate ceiling of 5, both subject to electrical checks. External drivers are excluded. This page makes no outdoor or waterproof claim.
Send photos or a section drawing showing both graphic faces, internal divider, mounting space, lens choice and quantities through our contact page for an optical-layout review.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
Flexible LED Stone Backlight Panel – 480×240mm, 24W/48W -
FOGA SYSTEM 10W LED Module – Edge-Lit Lightbox Bar -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
Side-Lit LED Module for MODULAP Systems -
12W/18W LED Module for MODULAP Fabric Lightbox -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens
European Sign Expo serves signage and visual-communication buyers. For a double-sided indoor sign cabinet, review both illuminated faces before selecting internal LED modules. Browse the full LED Modules range below.
Inspect each face in the assembled cabinet
Fit both final graphics and any planned internal divider. Check the illuminated faces separately from their intended viewing positions. Mounting brackets, cable routes and the second graphic can affect the usable optical layout; one approved face does not approve the other.
Specify the lens and mounting direction together
Record which way each bar faces and its exact lens option. The featured 7W side-lit module uses a standard 9°×50° lens; other stated angles require confirmation by request. Do not assume one perimeter arrangement will light both faces uniformly. Test before fixing production quantities.
Compare LED lightbox sources
- 7W side-lit optical module: DC24V, 770lm ±10%, standard 9°×50° lens and 2-pin connection; verify fixing-hole shape.
- Edge-lit length family: 3.5W/7W/21W, DC24V, 170/370/965mm and 10°×60° lens; select the exact length variant.
- Linkable edge-lit family: 9W/14W/20W, DC24V, 212/319/480mm and standard 20°×60° optics; verify the selected model.
Can a single-face layout be copied into a double-sided cabinet?
Only after checking the actual two-face construction. Review separation, depth and obstructions, then inspect both graphics. A published bar output is not a measured brightness value for either finished face.
Before ordering
These are internal sources, not finished double-sided signs. Verify DC24V, load, connector pinout and polarity. The featured 7W optical module has a ceiling of 8 per run; the linkable family has a separate ceiling of 5, both subject to electrical checks. External drivers are excluded. This page makes no outdoor or waterproof claim.
Send photos or a section drawing showing both graphic faces, internal divider, mounting space, lens choice and quantities through our contact page for an optical-layout review.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.