SIGN AND DISPLAY SHOW brings together sign and display suppliers. Check the usable space inside an indoor illuminated frame before choosing a compact light source. Browse the full LED Modules range below.
Measure clearance after the graphic and wiring are fitted
Allow for the lens, fixings, connector and cable path, not just the bare bar. Confirm access for unplugging a module during service. Frame-profile depth alone does not establish the usable mounting clearance.
Test the primary layout before adding corner light
Identify the dark area with the final graphic installed. A corner module supplements the main lighting; it does not replace it or guarantee that one bar fixes every shadow. Check aiming and white-light matching in the complete sample.
Compare LED lightbox sources
- Mini 7W edge-lit bar: 200mm, DC24V, 770lm and standard 20°×60° lens.
- Supplemental 8W corner bar: 202mm, DC24V, 600–700lm and 10°×40° lens.
- Slim 10W edge-lit bar: 360mm, DC24V, 1100lm and 9°×50° lens.
Does the 16mm height mean the aluminum plate alone?
No. For the highlighted corner and slim bars, 16mm is the overall height including the lens. Allow additional space for the chosen mounting hardware and cables.
Before ordering
These are internal sources, not finished signs. Verify DC24V power, total load, pinout and polarity. Add the corner module's load to the driver calculation. Confirm each model's wiring limit separately. No outdoor or waterproof suitability is implied by this indoor-frame selection.
Send a profile drawing, clear mounting dimensions, depth, connector photos and a photo of any dark area through our contact page for a fit review.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
SIGN AND DISPLAY SHOW brings together sign and display suppliers. Check the usable space inside an indoor illuminated frame before choosing a compact light source. Browse the full LED Modules range below.
Measure clearance after the graphic and wiring are fitted
Allow for the lens, fixings, connector and cable path, not just the bare bar. Confirm access for unplugging a module during service. Frame-profile depth alone does not establish the usable mounting clearance.
Test the primary layout before adding corner light
Identify the dark area with the final graphic installed. A corner module supplements the main lighting; it does not replace it or guarantee that one bar fixes every shadow. Check aiming and white-light matching in the complete sample.
Compare LED lightbox sources
- Mini 7W edge-lit bar: 200mm, DC24V, 770lm and standard 20°×60° lens.
- Supplemental 8W corner bar: 202mm, DC24V, 600–700lm and 10°×40° lens.
- Slim 10W edge-lit bar: 360mm, DC24V, 1100lm and 9°×50° lens.
Does the 16mm height mean the aluminum plate alone?
No. For the highlighted corner and slim bars, 16mm is the overall height including the lens. Allow additional space for the chosen mounting hardware and cables.
Before ordering
These are internal sources, not finished signs. Verify DC24V power, total load, pinout and polarity. Add the corner module's load to the driver calculation. Confirm each model's wiring limit separately. No outdoor or waterproof suitability is implied by this indoor-frame selection.
Send a profile drawing, clear mounting dimensions, depth, connector photos and a photo of any dark area through our contact page for a fit review.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.