StorePoint Retail is a hosted-buyer event connecting retail sourcing teams with display, signage and lighting suppliers. Prepare comparable component requests for retail lightboxes. Browse the full LED Modules range below.
Compare the same supply scope
List the exact model, selected variant, quantity per lightbox and units per pack. Separate included cables and mounting parts from separately required items. Compare each quotation against this list; a pack price is not a complete lightbox cost.
Include power and control in the request
Specify the required external power supply and connectors separately. The dual-CCT bar is direct backlighting and requires a compatible 3-wire switch or controller, not included. Confirm whether the requested control is supplied. Keep an alternative model in a separate quotation line until its fit and wiring are approved.
Compare LED lightbox sources
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W DC-plug edge-lit bar: 360×26×16mm including lens, DC24V, 1000lm ±10%, 15°×45° optics and dual-end DC sockets.
- Aluminum-profile edge-lit family: 22W/25W/32W, DC24V, 40.7×17mm housing and 14°×47° optics; specify length and wire exit.
Does the same wattage make quotations interchangeable?
No. Dimensions, optics, connectors, included accessories and control requirements may differ. Compare confirmed supply scope and validate the selected assembly before purchase.
Before ordering
Verify DC24V, total load, pinout and polarity. Confirm power, control, hardware and pack contents before ordering. The featured 10W DC-plug bar permits at most 6 per run after wiring checks; do not transfer that limit to other models. These modules are internal light sources, not complete fixtures.
Send the component list, selected variants, units per lightbox, project quantity and requested supply scope through our contact page for a comparable component quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
Flexible LED Stone Backlight Panel – 480×240mm, 24W/48W -
FOGA SYSTEM 10W LED Module – Edge-Lit Lightbox Bar -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
Side-Lit LED Module for MODULAP Systems -
12W/18W LED Module for MODULAP Fabric Lightbox -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens
StorePoint Retail is a hosted-buyer event connecting retail sourcing teams with display, signage and lighting suppliers. Prepare comparable component requests for retail lightboxes. Browse the full LED Modules range below.
Compare the same supply scope
List the exact model, selected variant, quantity per lightbox and units per pack. Separate included cables and mounting parts from separately required items. Compare each quotation against this list; a pack price is not a complete lightbox cost.
Include power and control in the request
Specify the required external power supply and connectors separately. The dual-CCT bar is direct backlighting and requires a compatible 3-wire switch or controller, not included. Confirm whether the requested control is supplied. Keep an alternative model in a separate quotation line until its fit and wiring are approved.
Compare LED lightbox sources
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W DC-plug edge-lit bar: 360×26×16mm including lens, DC24V, 1000lm ±10%, 15°×45° optics and dual-end DC sockets.
- Aluminum-profile edge-lit family: 22W/25W/32W, DC24V, 40.7×17mm housing and 14°×47° optics; specify length and wire exit.
Does the same wattage make quotations interchangeable?
No. Dimensions, optics, connectors, included accessories and control requirements may differ. Compare confirmed supply scope and validate the selected assembly before purchase.
Before ordering
Verify DC24V, total load, pinout and polarity. Confirm power, control, hardware and pack contents before ordering. The featured 10W DC-plug bar permits at most 6 per run after wiring checks; do not transfer that limit to other models. These modules are internal light sources, not complete fixtures.
Send the component list, selected variants, units per lightbox, project quantity and requested supply scope through our contact page for a comparable component quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.