Sign&Print Scandinavia brings together sign and graphic-production suppliers in Sweden. For fabric lightbox builders and illuminated-sign buyers, this selection focuses on choosing the white-light system before approving a printed display for repeat production.
Choose fixed white light or two selectable white channels
Use a fixed-CCT edge-lit bar when the frame and graphic have an approved white tone. Choose a dual-CCT direct-backlight bar when the display needs two selectable white-light settings. These layouts place the LEDs differently: edge-lit bars project across the frame, while direct-backlight bars face the graphic from behind. They are not interchangeable without redesigning and testing the layout.
Approve the white tone with the intended graphic
Compare the same printed graphic under the proposed settings and the intended viewing conditions. Record the selected CCT variant, frame depth, optical arrangement and approved sample. A similar nominal CCT does not guarantee identical appearance across different bar models, materials or production batches. Keep replacement specifications with the finished display.
Compare LED lightbox sources
- 12W dual-CCT direct-backlight bar: DC24V, 1320lm, 3-wire JST. Select 3000K + 4500K, 4500K + 6500K, or 3000K + 6400K; compatible control equipment is required separately.
- 12W compact edge-lit bar: 313mm, DC24V, 1200lm ±10%, 9°×50° lens and 2-pin plug. Check the available frame length and connector compatibility.
- 18W extended edge-lit bar: 585mm, DC24V, 1800lm and 14°×50° lens. Check the Molex 5557 / Mini-Fit Jr. connector family and mating pinout.
Does dual-CCT mean continuously adjustable white light?
Each variant has two named white-light channels. A compatible 3-wire switch or controller selects them; intermediate blending requires a controller that supports mixing. The switch, controller and power supply are not included. Fixed-CCT edge-lit bars do not gain this function by sharing a DC24V supply.
Before ordering
These products are internal light sources. Confirm mounting space, graphic transmission, DC24V driver capacity, connector pinout and polarity. The 313mm bar is not dimmable and is listed for a maximum of six bars per run; verify the complete electrical design. Test the actual layout before ordering production quantities.
Send the illuminated dimensions, frame depth, graphic material, required white-light settings and estimated quantity through our contact page. Include the product links so we can review the proposed selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
Flexible LED Stone Backlight Panel – 480×240mm, 24W/48W -
FOGA SYSTEM 10W LED Module – Edge-Lit Lightbox Bar -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
Side-Lit LED Module for MODULAP Systems -
12W/18W LED Module for MODULAP Fabric Lightbox -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+
Sign&Print Scandinavia brings together sign and graphic-production suppliers in Sweden. For fabric lightbox builders and illuminated-sign buyers, this selection focuses on choosing the white-light system before approving a printed display for repeat production.
Choose fixed white light or two selectable white channels
Use a fixed-CCT edge-lit bar when the frame and graphic have an approved white tone. Choose a dual-CCT direct-backlight bar when the display needs two selectable white-light settings. These layouts place the LEDs differently: edge-lit bars project across the frame, while direct-backlight bars face the graphic from behind. They are not interchangeable without redesigning and testing the layout.
Approve the white tone with the intended graphic
Compare the same printed graphic under the proposed settings and the intended viewing conditions. Record the selected CCT variant, frame depth, optical arrangement and approved sample. A similar nominal CCT does not guarantee identical appearance across different bar models, materials or production batches. Keep replacement specifications with the finished display.
Compare LED lightbox sources
- 12W dual-CCT direct-backlight bar: DC24V, 1320lm, 3-wire JST. Select 3000K + 4500K, 4500K + 6500K, or 3000K + 6400K; compatible control equipment is required separately.
- 12W compact edge-lit bar: 313mm, DC24V, 1200lm ±10%, 9°×50° lens and 2-pin plug. Check the available frame length and connector compatibility.
- 18W extended edge-lit bar: 585mm, DC24V, 1800lm and 14°×50° lens. Check the Molex 5557 / Mini-Fit Jr. connector family and mating pinout.
Does dual-CCT mean continuously adjustable white light?
Each variant has two named white-light channels. A compatible 3-wire switch or controller selects them; intermediate blending requires a controller that supports mixing. The switch, controller and power supply are not included. Fixed-CCT edge-lit bars do not gain this function by sharing a DC24V supply.
Before ordering
These products are internal light sources. Confirm mounting space, graphic transmission, DC24V driver capacity, connector pinout and polarity. The 313mm bar is not dimmable and is listed for a maximum of six bars per run; verify the complete electrical design. Test the actual layout before ordering production quantities.
Send the illuminated dimensions, frame depth, graphic material, required white-light settings and estimated quantity through our contact page. Include the product links so we can review the proposed selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.