Developing printed menu or restaurant-brand lightboxes for RC Show? Compare internal LED sources using your actual graphic and enclosure. Browse all 26 Modules products below; select a sample before ordering for multiple signs.
Will printed food images and brand whites look right when illuminated?
Test the final print, diffuser and frame together. Review pale food areas, dark backgrounds and small menu text under the intended ambient light. Compare white-tone samples with the restaurant's surrounding finishes; color temperature alone cannot predict the finished appearance.
Can the menu graphic change without disturbing the wiring?
Plan a clear graphic-removal path and accessible LED and driver connections. Check one replacement cycle with the frame assembled. Keep cables clear of retainers and record the approved layout before repeating it across branches.
Compare LED lightbox sources
- 12W dual-CCT rear-backlighting bar: DC24V, 1320lm, 180° optics and 3-wire JST. Select the required two-white-tone variant.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
- 10W slim edge-lit bar: DC24V, 360×23×16mm including lens, 1100lm, 9°×50° optics.
Can these LED modules run a digital menu screen?
They illuminate compatible printed lightbox graphics. A digital menu display requires its own screen hardware. This selection is for indoor sign prototypes; confirm the exact product's installation conditions for any other use.
Before ordering
Featured bars use separate DC24V constant-voltage supplies. The dual-CCT model also needs a compatible separate 3-wire controller. Check connector pinout, polarity, cable rating and load; no universal chain length or existing-kit compatibility is assumed.
Send enclosure depth, print samples, the graphic-change method and branch quantities for a layout review and quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Developing printed menu or restaurant-brand lightboxes for RC Show? Compare internal LED sources using your actual graphic and enclosure. Browse all 26 Modules products below; select a sample before ordering for multiple signs.
Will printed food images and brand whites look right when illuminated?
Test the final print, diffuser and frame together. Review pale food areas, dark backgrounds and small menu text under the intended ambient light. Compare white-tone samples with the restaurant's surrounding finishes; color temperature alone cannot predict the finished appearance.
Can the menu graphic change without disturbing the wiring?
Plan a clear graphic-removal path and accessible LED and driver connections. Check one replacement cycle with the frame assembled. Keep cables clear of retainers and record the approved layout before repeating it across branches.
Compare LED lightbox sources
- 12W dual-CCT rear-backlighting bar: DC24V, 1320lm, 180° optics and 3-wire JST. Select the required two-white-tone variant.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
- 10W slim edge-lit bar: DC24V, 360×23×16mm including lens, 1100lm, 9°×50° optics.
Can these LED modules run a digital menu screen?
They illuminate compatible printed lightbox graphics. A digital menu display requires its own screen hardware. This selection is for indoor sign prototypes; confirm the exact product's installation conditions for any other use.
Before ordering
Featured bars use separate DC24V constant-voltage supplies. The dual-CCT model also needs a compatible separate 3-wire controller. Check connector pinout, polarity, cable rating and load; no universal chain length or existing-kit compatibility is assumed.
Send enclosure depth, print samples, the graphic-change method and branch quantities for a layout review and quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.