Building fabric lightboxes for Natural Products Expo West? Compare internal LED bars for branded backwalls alongside unlit graphics. Select by the real print and frame, then browse all 26 Modules products below.
How can lit and unlit brand graphics look consistent?
Compare physical prints together under the intended ambient light and backlighting. Review brand colors, white areas and dark backgrounds. A shared wattage or color temperature cannot guarantee a match; approve the combined appearance before buying quantities.
Should I use edge-lit bars or LEDs behind the fabric?
Measure internal depth, usable edge length and LED-to-fabric clearance. Edge-lit bars direct light inward; the featured dual-CCT bar provides direct rear backlighting. Test one complete graphic section for bright edges, shadows and color differences.
Compare LED lightbox sources
- 12W dual-CCT rear-backlighting bar: DC24V, 1320lm, 180° optics and 3-wire JST. Select the required two-white-tone variant.
- Linkable edge-lit bars: DC24V, 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
Can the same LEDs also light raised logos and counter trim?
Treat fabric backlighting, raised-logo highlights and counter decoration as separate optical and electrical tasks. These are internal lightbox components; no fit with an exhibitor's existing kit is implied.
Before ordering
The featured bars require separate DC24V constant-voltage supplies. The dual-CCT model needs a compatible 3-wire switch/controller, also separate. The linkable family allows up to five compatible bars per run after cable, polarity and load checks; this is not a limit for all products.
Send frame drawings, fabric print samples, lit/unlit graphic positions and connector details for a sample layout and quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Building fabric lightboxes for Natural Products Expo West? Compare internal LED bars for branded backwalls alongside unlit graphics. Select by the real print and frame, then browse all 26 Modules products below.
How can lit and unlit brand graphics look consistent?
Compare physical prints together under the intended ambient light and backlighting. Review brand colors, white areas and dark backgrounds. A shared wattage or color temperature cannot guarantee a match; approve the combined appearance before buying quantities.
Should I use edge-lit bars or LEDs behind the fabric?
Measure internal depth, usable edge length and LED-to-fabric clearance. Edge-lit bars direct light inward; the featured dual-CCT bar provides direct rear backlighting. Test one complete graphic section for bright edges, shadows and color differences.
Compare LED lightbox sources
- 12W dual-CCT rear-backlighting bar: DC24V, 1320lm, 180° optics and 3-wire JST. Select the required two-white-tone variant.
- Linkable edge-lit bars: DC24V, 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
Can the same LEDs also light raised logos and counter trim?
Treat fabric backlighting, raised-logo highlights and counter decoration as separate optical and electrical tasks. These are internal lightbox components; no fit with an exhibitor's existing kit is implied.
Before ordering
The featured bars require separate DC24V constant-voltage supplies. The dual-CCT model needs a compatible 3-wire switch/controller, also separate. The linkable family allows up to five compatible bars per run after cable, polarity and load checks; this is not a limit for all products.
Send frame drawings, fabric print samples, lit/unlit graphic positions and connector details for a sample layout and quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.