Graphics Canada Expo includes the Canadian SIGN Show and connects print and display suppliers. Test the backlit graphic with its intended light source before ordering a production run. Browse the full LED Modules range below.
Proof the printed graphic inside its intended lightbox
Use the final printed fabric, ink setup and reflective surfaces. Compare the illuminated sample and its unlit appearance separately. Check dark areas, bright edges and visible LED points at the planned depth; a desktop print alone does not show the finished backlit result.
Keep an approved print-and-lighting sample for repeat work
Record the print substrate, selected white-light range, bar model, spacing and frame depth with the approved sample. A change in fabric or light source needs another test. Keep the same approved configuration when reordering modules for repeat displays.
Compare LED lightbox sources
- Slim 10W edge-lit bar: 360mm, DC24V, 1100lm, CRI 90+ and 9°×50° lens for tested frame-edge layouts.
- 12W dual-CCT direct-backlight bar: DC24V, 1320lm, CRI 90+, 180° beam and 3-wire JST; choose the white-light pair.
- Compact 12W edge-lit bar: 313mm, DC24V, 1200lm ±10%, 9°×50° lens and 2-pin connection.
Does CRI 90+ guarantee a printed brand color match?
No. Color appearance also depends on the printed material, ink, white-light setting and ambient light. Approve the actual illuminated sample; CRI alone is not a print color-match specification.
Before ordering
These are internal sources, not complete lightboxes. Verify DC24V power, total load and polarity. The slim 10W and compact 12W bars allow at most 6 per run, subject to wiring checks. The dual-CCT bar needs a compatible switch or controller, not included; intermediate blending requires channel-mixing support.
Send the printed material, illuminated dimensions, frame depth, desired white-light option and production quantity through our contact page to review the source and layout.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
Flexible LED Stone Backlight Panel – 480×240mm, 24W/48W -
FOGA SYSTEM 10W LED Module – Edge-Lit Lightbox Bar -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
Side-Lit LED Module for MODULAP Systems -
12W/18W LED Module for MODULAP Fabric Lightbox -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens
Graphics Canada Expo includes the Canadian SIGN Show and connects print and display suppliers. Test the backlit graphic with its intended light source before ordering a production run. Browse the full LED Modules range below.
Proof the printed graphic inside its intended lightbox
Use the final printed fabric, ink setup and reflective surfaces. Compare the illuminated sample and its unlit appearance separately. Check dark areas, bright edges and visible LED points at the planned depth; a desktop print alone does not show the finished backlit result.
Keep an approved print-and-lighting sample for repeat work
Record the print substrate, selected white-light range, bar model, spacing and frame depth with the approved sample. A change in fabric or light source needs another test. Keep the same approved configuration when reordering modules for repeat displays.
Compare LED lightbox sources
- Slim 10W edge-lit bar: 360mm, DC24V, 1100lm, CRI 90+ and 9°×50° lens for tested frame-edge layouts.
- 12W dual-CCT direct-backlight bar: DC24V, 1320lm, CRI 90+, 180° beam and 3-wire JST; choose the white-light pair.
- Compact 12W edge-lit bar: 313mm, DC24V, 1200lm ±10%, 9°×50° lens and 2-pin connection.
Does CRI 90+ guarantee a printed brand color match?
No. Color appearance also depends on the printed material, ink, white-light setting and ambient light. Approve the actual illuminated sample; CRI alone is not a print color-match specification.
Before ordering
These are internal sources, not complete lightboxes. Verify DC24V power, total load and polarity. The slim 10W and compact 12W bars allow at most 6 per run, subject to wiring checks. The dual-CCT bar needs a compatible switch or controller, not included; intermediate blending requires channel-mixing support.
Send the printed material, illuminated dimensions, frame depth, desired white-light option and production quantity through our contact page to review the source and layout.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.