C!Print Madrid connects print and visual-communication professionals. When changing a retail lightbox graphic, check the lighting configuration as well as the new print. Browse the full LED Modules range below for white-light and color-effect options.
Choose steady white light or a controlled color effect
Use a dedicated white bar when the display needs a fixed white-light range. RGB mixes red, green and blue; RGBW adds a separate white channel. Do not treat an RGB color mix as an equivalent white-light source. Review the effect on the actual graphic before selecting the system.
Record settings before the next graphic changeover
Keep the approved graphic sample, bar model, controller preset and wiring diagram together. After a new print is installed, check color appearance and light distribution using that same configuration. Changing a lens, controller or graphic material requires another sample review.
Compare LED lightbox sources
- 24W RGB edge-lit bar: 480mm, DC24V, 20°×60° lens and 4-pin SM JST; no separate white channel.
- 30W RGBW bar: 400mm, DC24V, single-angle 25° beam and 5-pin SM JST, with a separate white channel.
- 13W fixed-white edge-lit bar: 360mm, DC24V, 1430lm and 15°×60° lens; select one white-light range.
Can an RGB-only controller operate an RGBW white channel?
It cannot independently control the separate white channel. Use a compatible RGBW controller and confirm the pin order. Available scenes and transitions depend on the controller, not the bar alone.
Before ordering
These are internal sources, not finished retail lightboxes. Verify DC24V power, polarity and controller ratings. The highlighted RGB and RGBW bars allow at most 5 per powered run, subject to load and wiring checks. Bar-only variants exclude power supply and controller; check the accessories selected for each kit.
Send the graphic sample, frame dimensions, depth, desired white light or color effect, existing controller and quantity through our contact page to review the changeover configuration.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
Flexible LED Stone Backlight Panel – 480×240mm, 24W/48W -
FOGA SYSTEM 10W LED Module – Edge-Lit Lightbox Bar -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
Side-Lit LED Module for MODULAP Systems -
12W/18W LED Module for MODULAP Fabric Lightbox -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens
C!Print Madrid connects print and visual-communication professionals. When changing a retail lightbox graphic, check the lighting configuration as well as the new print. Browse the full LED Modules range below for white-light and color-effect options.
Choose steady white light or a controlled color effect
Use a dedicated white bar when the display needs a fixed white-light range. RGB mixes red, green and blue; RGBW adds a separate white channel. Do not treat an RGB color mix as an equivalent white-light source. Review the effect on the actual graphic before selecting the system.
Record settings before the next graphic changeover
Keep the approved graphic sample, bar model, controller preset and wiring diagram together. After a new print is installed, check color appearance and light distribution using that same configuration. Changing a lens, controller or graphic material requires another sample review.
Compare LED lightbox sources
- 24W RGB edge-lit bar: 480mm, DC24V, 20°×60° lens and 4-pin SM JST; no separate white channel.
- 30W RGBW bar: 400mm, DC24V, single-angle 25° beam and 5-pin SM JST, with a separate white channel.
- 13W fixed-white edge-lit bar: 360mm, DC24V, 1430lm and 15°×60° lens; select one white-light range.
Can an RGB-only controller operate an RGBW white channel?
It cannot independently control the separate white channel. Use a compatible RGBW controller and confirm the pin order. Available scenes and transitions depend on the controller, not the bar alone.
Before ordering
These are internal sources, not finished retail lightboxes. Verify DC24V power, polarity and controller ratings. The highlighted RGB and RGBW bars allow at most 5 per powered run, subject to load and wiring checks. Bar-only variants exclude power supply and controller; check the accessories selected for each kit.
Send the graphic sample, frame dimensions, depth, desired white light or color effect, existing controller and quantity through our contact page to review the changeover configuration.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.