Looking for Travel & Adventure Show lightbox LED modules? Compare sources for your own destination-brand display. The series’ Seattle exhibitor kit shows single and double-sided printed lightbox options; current packages and stand rules should be confirmed separately.
Does my stand need illuminated graphics on both sides?
Identify which faces visitors can see from aisles and meeting areas. A rear face against a wall may not need the same graphic treatment as a freestanding face. Specify each printed side and usable internal space before choosing LEDs; two visible faces do not necessarily mean identical source quantities.
Can a single-sided LED layout evenly light both faces?
Do not assume it can. Source direction, mounting position and the distance to each face affect the result. Test both actual prints with the proposed frame and sources. Compare suitable layouts rather than assuming that adding a rear graphic converts a single-sided arrangement into a verified double-sided lightbox.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for a double-sided lightbox recommendation?
Provide frame section, usable depth, dimensions and material of each printed face, planned source positions and power arrangement. These modules are components for a specified build; no compatibility with the exhibitor-kit rental frames or permission to alter supplied equipment is claimed.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send a sketch showing both faces and visitor viewpoints, print materials and frame dimensions through Contact us to compare sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for Travel & Adventure Show lightbox LED modules? Compare sources for your own destination-brand display. The series’ Seattle exhibitor kit shows single and double-sided printed lightbox options; current packages and stand rules should be confirmed separately.
Does my stand need illuminated graphics on both sides?
Identify which faces visitors can see from aisles and meeting areas. A rear face against a wall may not need the same graphic treatment as a freestanding face. Specify each printed side and usable internal space before choosing LEDs; two visible faces do not necessarily mean identical source quantities.
Can a single-sided LED layout evenly light both faces?
Do not assume it can. Source direction, mounting position and the distance to each face affect the result. Test both actual prints with the proposed frame and sources. Compare suitable layouts rather than assuming that adding a rear graphic converts a single-sided arrangement into a verified double-sided lightbox.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for a double-sided lightbox recommendation?
Provide frame section, usable depth, dimensions and material of each printed face, planned source positions and power arrangement. These modules are components for a specified build; no compatibility with the exhibitor-kit rental frames or permission to alter supplied equipment is claimed.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send a sketch showing both faces and visitor viewpoints, print materials and frame dimensions through Contact us to compare sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.