Looking for The Baby Show fabric lightbox LED modules? A display supplier discusses LED-backlit SEG graphics for this event. This selection supports your independently specified rigid-frame printed box, with the actual graphic tested before ordering.
Why can a pale background reveal bright bands in my lightbox?
Large pale areas can make lighting variation easier to see. Test the actual print in the intended frame with the planned source positions and diffuser arrangement. Inspect the full face rather than judging only the logo area.
Will more total light remove visible bright and dark bands?
Increasing total output does not establish uniformity. Review frame depth, source spacing, optical direction and obstructions, then retest the same print after each controlled layout change. Approve the complete face before choosing the final quantity.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these bars drop-in replacements for an inflatable display?
No such compatibility is claimed. The featured rigid bars require verified mounting, clearance and electrical arrangements in a suitable frame. Ask the original system supplier about its components rather than assuming fit to an inflatable structure.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the full graphic, a photo of any banding, frame section and planned source layout through Contact us to compare options.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for The Baby Show fabric lightbox LED modules? A display supplier discusses LED-backlit SEG graphics for this event. This selection supports your independently specified rigid-frame printed box, with the actual graphic tested before ordering.
Why can a pale background reveal bright bands in my lightbox?
Large pale areas can make lighting variation easier to see. Test the actual print in the intended frame with the planned source positions and diffuser arrangement. Inspect the full face rather than judging only the logo area.
Will more total light remove visible bright and dark bands?
Increasing total output does not establish uniformity. Review frame depth, source spacing, optical direction and obstructions, then retest the same print after each controlled layout change. Approve the complete face before choosing the final quantity.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these bars drop-in replacements for an inflatable display?
No such compatibility is claimed. The featured rigid bars require verified mounting, clearance and electrical arrangements in a suitable frame. Ask the original system supplier about its components rather than assuming fit to an inflatable structure.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the full graphic, a photo of any banding, frame section and planned source layout through Contact us to compare options.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.