Looking for Seattle Auto Show fabric lightbox LED modules? Compare internal sources for your own printed wall. The organizer’s manual explicitly lists a fabric lightbox wall as a display example; confirm your build and venue arrangements separately.
Which electrical details matter before I order lightbox LED bars?
List the chosen model, rated input, quantity and intended branch layout. Check compatible supply capacity, wire runs and connector limits for that model. Keep the lightbox circuit identifiable in the wider stand plan; a venue power connection does not define LED voltage or chain limits.
Can the vehicle display and lightbox use the same LED power supply?
Do not assume they share an input or load requirement. Compare each device’s specifications and the intended electrical arrangement. Internal LED bars need a compatible supply and verified wiring; a supply chosen for a different stand feature is not automatically suitable for the lightbox.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
How do I keep connectors accessible behind the fabric?
Plan access before fixing the source layout. Keep cables clear of the printed face and avoid trapping connections where inspection requires dismantling the whole wall. Confirm mounting and access with the frame builder; the fabric opening alone does not guarantee safe or convenient maintenance.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send frame dimensions, selected models and quantities, branch sketch and supply details through Contact us to compare sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for Seattle Auto Show fabric lightbox LED modules? Compare internal sources for your own printed wall. The organizer’s manual explicitly lists a fabric lightbox wall as a display example; confirm your build and venue arrangements separately.
Which electrical details matter before I order lightbox LED bars?
List the chosen model, rated input, quantity and intended branch layout. Check compatible supply capacity, wire runs and connector limits for that model. Keep the lightbox circuit identifiable in the wider stand plan; a venue power connection does not define LED voltage or chain limits.
Can the vehicle display and lightbox use the same LED power supply?
Do not assume they share an input or load requirement. Compare each device’s specifications and the intended electrical arrangement. Internal LED bars need a compatible supply and verified wiring; a supply chosen for a different stand feature is not automatically suitable for the lightbox.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
How do I keep connectors accessible behind the fabric?
Plan access before fixing the source layout. Keep cables clear of the printed face and avoid trapping connections where inspection requires dismantling the whole wall. Confirm mounting and access with the frame builder; the fabric opening alone does not guarantee safe or convenient maintenance.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send frame dimensions, selected models and quantities, branch sketch and supply details through Contact us to compare sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.