Building destination-photo lightboxes for Seatrade Cruise Global? Compare internal LED bars for static graphic panels around lounge meeting areas. Check the printed face from the aisle and from a seat before selecting a source; nearby video displays require their own equipment.
Which LED bars suit a destination-photo lightbox?
Start with the actual transmitting graphic, clear enclosure depth and source mounting positions. Test a representative photo containing pale skies and darker detail to compare bright patches, edge falloff and colour appearance. A matching wattage or white colour temperature does not guarantee the same result behind different films or fabrics. Compare the optics and dimensions of candidate bars against each enclosure.
How should I test lightboxes above lounge seating?
View the illuminated sample from the planned seated position as well as the standing aisle position. Check whether the frame, benches or other fixtures hide part of the message and whether the graphic seems too dominant beside the meeting area. Record each box separately, including its front material, opening, internal obstructions and service access; total pavilion area is not an LED quantity calculation.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can these modules light the video screen beside the graphics?
No. These are internal sources for transmitting graphic lightboxes, not video-display pixels or TV repair backlights. Keep static graphic boxes, screens and decorative light strips separate in the equipment schedule. For the graphic boxes, confirm model voltage, connector pinout, polarity, load and permitted wiring arrangement; similar connectors do not establish compatibility. These indoor display applications do not establish marine suitability.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send labelled lightbox sections, actual front samples, clear dimensions, mounting locations and power-supply details for a component selection review. Identify the nearby screens and seated viewpoints; confirm permission before changing rented hardware. Compare all 26 products below, then request a quote for the compatible sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Building destination-photo lightboxes for Seatrade Cruise Global? Compare internal LED bars for static graphic panels around lounge meeting areas. Check the printed face from the aisle and from a seat before selecting a source; nearby video displays require their own equipment.
Which LED bars suit a destination-photo lightbox?
Start with the actual transmitting graphic, clear enclosure depth and source mounting positions. Test a representative photo containing pale skies and darker detail to compare bright patches, edge falloff and colour appearance. A matching wattage or white colour temperature does not guarantee the same result behind different films or fabrics. Compare the optics and dimensions of candidate bars against each enclosure.
How should I test lightboxes above lounge seating?
View the illuminated sample from the planned seated position as well as the standing aisle position. Check whether the frame, benches or other fixtures hide part of the message and whether the graphic seems too dominant beside the meeting area. Record each box separately, including its front material, opening, internal obstructions and service access; total pavilion area is not an LED quantity calculation.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can these modules light the video screen beside the graphics?
No. These are internal sources for transmitting graphic lightboxes, not video-display pixels or TV repair backlights. Keep static graphic boxes, screens and decorative light strips separate in the equipment schedule. For the graphic boxes, confirm model voltage, connector pinout, polarity, load and permitted wiring arrangement; similar connectors do not establish compatibility. These indoor display applications do not establish marine suitability.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send labelled lightbox sections, actual front samples, clear dimensions, mounting locations and power-supply details for a component selection review. Identify the nearby screens and seated viewpoints; confirm permission before changing rented hardware. Compare all 26 products below, then request a quote for the compatible sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.