Researching retail display lighting at RetailTech JAPAN? This collection helps sign builders specify internal LED modules for a separately designed printed lightbox. A retail lighting catalogue can include both mains-powered modules and low-voltage systems; the module input must be identified before ordering.
Start with the module input, not the wall socket
Record the input printed on the proposed module and the output of its dedicated power supply. The DC24V bars featured below need a matching DC supply; a Japanese AC100V site supply is not the module input. Have the installer approve the complete electrical design.
Compare LED Modules for your test frame
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Can I replace an AC100V sign module with a DC24V bar?
Do not treat them as interchangeable. A DC24V assembly needs its own suitable supply, wiring and protection. Identify the existing system before considering a separately engineered replacement.
Does a similar connector prove compatibility?
No. Confirm polarity, pin assignment and current capacity as well as physical fit. Record the selected module, supply and approved mating connector together in the purchasing specification.
What should the store maintenance team receive?
Provide the approved wiring drawing, component labels and access location for the supply. Test the actual printed face in the proposed frame, and keep a reference sample before ordering repeat store sets.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W/18W LED Module for MODULAP Fabric Lightbox -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
Side-Lit LED Module for MODULAP Systems -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Researching retail display lighting at RetailTech JAPAN? This collection helps sign builders specify internal LED modules for a separately designed printed lightbox. A retail lighting catalogue can include both mains-powered modules and low-voltage systems; the module input must be identified before ordering.
Start with the module input, not the wall socket
Record the input printed on the proposed module and the output of its dedicated power supply. The DC24V bars featured below need a matching DC supply; a Japanese AC100V site supply is not the module input. Have the installer approve the complete electrical design.
Compare LED Modules for your test frame
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Can I replace an AC100V sign module with a DC24V bar?
Do not treat them as interchangeable. A DC24V assembly needs its own suitable supply, wiring and protection. Identify the existing system before considering a separately engineered replacement.
Does a similar connector prove compatibility?
No. Confirm polarity, pin assignment and current capacity as well as physical fit. Record the selected module, supply and approved mating connector together in the purchasing specification.
What should the store maintenance team receive?
Provide the approved wiring drawing, component labels and access location for the supply. Test the actual printed face in the proposed frame, and keep a reference sample before ordering repeat store sets.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.