Choosing LED modules for printed exhibition lightbox walls and towers at a RANZCR Annual Scientific Meeting? Compare internal lighting for these different frame formats. These components serve branded display graphics, not radiology image assessment.
Can a lightbox tower use the same bars as a wide graphic wall?
The same model may be a candidate, but the layout is not transferable by name alone. Measure each clear cavity, lens clearance and support position. Test the tower's narrow panels and the wall's broad centre separately with the actual fabric; compare edge-lit bars and rear backlighting before choosing quantities.
How do I keep tower and wall graphics visually consistent?
Use the intended printed fabrics and selected white tone in both samples. Inspect from the aisle and close discussion positions, including tower corners and panel joins. Match the visible graphic result rather than bar count or wattage; test spacing in each format. Check each supply's connected load and label wall and tower cable sets separately.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these LED modules suitable for diagnostic X-ray film viewing?
This collection is for exhibition graphic lightboxes. It does not establish diagnostic luminance, calibration or clinical viewing performance. Do not purchase these display components as a diagnostic viewer or medical device. For an existing exhibit frame, verify mounting, wiring and supply compatibility with its owner.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send wall and tower drawings, clear depths, support and joint locations, fabric samples and supply labels. Request separate sample layouts for the two frame formats before committing to production quantities.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Choosing LED modules for printed exhibition lightbox walls and towers at a RANZCR Annual Scientific Meeting? Compare internal lighting for these different frame formats. These components serve branded display graphics, not radiology image assessment.
Can a lightbox tower use the same bars as a wide graphic wall?
The same model may be a candidate, but the layout is not transferable by name alone. Measure each clear cavity, lens clearance and support position. Test the tower's narrow panels and the wall's broad centre separately with the actual fabric; compare edge-lit bars and rear backlighting before choosing quantities.
How do I keep tower and wall graphics visually consistent?
Use the intended printed fabrics and selected white tone in both samples. Inspect from the aisle and close discussion positions, including tower corners and panel joins. Match the visible graphic result rather than bar count or wattage; test spacing in each format. Check each supply's connected load and label wall and tower cable sets separately.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these LED modules suitable for diagnostic X-ray film viewing?
This collection is for exhibition graphic lightboxes. It does not establish diagnostic luminance, calibration or clinical viewing performance. Do not purchase these display components as a diagnostic viewer or medical device. For an existing exhibit frame, verify mounting, wiring and supply compatibility with its owner.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send wall and tower drawings, clear depths, support and joint locations, fabric samples and supply labels. Request separate sample layouts for the two frame formats before committing to production quantities.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.