PROMO SHOW brings advertising, printing and promotional-product professionals together. For indoor printed lightboxes, check the smaller message as well as the headline. Compare all LED Modules below with the frame, printed face and intended viewing conditions.
Identify the text that must remain readable
Mark the smallest required text and its background in the actual artwork. Agree on the viewing position and ambient lighting with the customer. Use the final-size printed sample; a zoomed screen image or large logo does not establish that small promotional text will be readable.
Assess the message in the illuminated build
After qualified mounting and wiring checks, review the small text with the selected source in the complete lightbox. Record the print version, viewing conditions and observations. If letters are unclear, discuss size, weight and contrast with the graphic supplier before changing LED output. Approve the revised artwork and lighting together; more light alone does not guarantee legibility.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a bright headline prove the small print is readable?
No. Review the smallest required message separately in the actual illuminated print at the agreed viewing position. Keep the accepted artwork version and source configuration with the customer approval.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the frame drawing, artwork version, smallest required text, viewing conditions, LED candidates, sample observations and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
PROMO SHOW brings advertising, printing and promotional-product professionals together. For indoor printed lightboxes, check the smaller message as well as the headline. Compare all LED Modules below with the frame, printed face and intended viewing conditions.
Identify the text that must remain readable
Mark the smallest required text and its background in the actual artwork. Agree on the viewing position and ambient lighting with the customer. Use the final-size printed sample; a zoomed screen image or large logo does not establish that small promotional text will be readable.
Assess the message in the illuminated build
After qualified mounting and wiring checks, review the small text with the selected source in the complete lightbox. Record the print version, viewing conditions and observations. If letters are unclear, discuss size, weight and contrast with the graphic supplier before changing LED output. Approve the revised artwork and lighting together; more light alone does not guarantee legibility.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a bright headline prove the small print is readable?
No. Review the smallest required message separately in the actual illuminated print at the agreed viewing position. Keep the accepted artwork version and source configuration with the customer approval.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the frame drawing, artwork version, smallest required text, viewing conditions, LED candidates, sample observations and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.