Orbus University offers dealer training and hands-on display assembly, including lightboxes. If you are exploring an independently designed indoor lightbox after learning about display systems, use this collection to compare LED components for your own build. All LED Modules are available below.
Choose the illumination approach for your own frame
Start with a section drawing showing the face, cavity, rear panel and usable mounting positions. Edge-lit bars send light across the cavity from the frame edge; rear-backlight bars sit behind the graphic. Their optics and mounting arrangements differ, so choose candidates from the construction rather than a demonstration’s appearance.
Build an independent evaluation sample
Use your proposed frame and actual graphic with a documented LED layout and suitable separate power and controls. Review illumination, mechanical fit, wiring access and the finished face together. Keep the selected model and options in the sample record. A small trial is a starting point; repeat the review if the production geometry changes.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these authorized replacement LED bars for Orbus display systems?
No authorized replacement status or universal Orbus compatibility is claimed. This collection supports independent component enquiries. For an existing proprietary display, identify its exact construction and obtain a compatibility review before proposing changes.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send your own frame section, graphic material, lighting approach, candidate models, sample observations and required quantities through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Orbus University offers dealer training and hands-on display assembly, including lightboxes. If you are exploring an independently designed indoor lightbox after learning about display systems, use this collection to compare LED components for your own build. All LED Modules are available below.
Choose the illumination approach for your own frame
Start with a section drawing showing the face, cavity, rear panel and usable mounting positions. Edge-lit bars send light across the cavity from the frame edge; rear-backlight bars sit behind the graphic. Their optics and mounting arrangements differ, so choose candidates from the construction rather than a demonstration’s appearance.
Build an independent evaluation sample
Use your proposed frame and actual graphic with a documented LED layout and suitable separate power and controls. Review illumination, mechanical fit, wiring access and the finished face together. Keep the selected model and options in the sample record. A small trial is a starting point; repeat the review if the production geometry changes.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these authorized replacement LED bars for Orbus display systems?
No authorized replacement status or universal Orbus compatibility is claimed. This collection supports independent component enquiries. For an existing proprietary display, identify its exact construction and obtain a compatibility review before proposing changes.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send your own frame section, graphic material, lighting approach, candidate models, sample observations and required quantities through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.