Looking for LED bars for backlit fabric lightboxes around OCTANORM co-lab: system meets fabric? The partner programme combines modular frames and textiles. Partner VISIX also supplies illuminated fabric graphics. Compare independent lightbox LEDs here using your intended fabric and frame.
Which fabric should I test with lightbox LED modules?
Use the actual light-transmitting graphic intended for the illuminated face. Blockout fabric serves a different purpose. Keep the print process, fabric reference and frame dimensions with the sample when comparing LEDs.
How can I check shadows at the edges of a fabric lightbox?
Tension the printed sample in a representative frame. Inspect seams, corners and the full perimeter with the intended LED arrangement. Compare the complete illuminated face before repeating the order.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Do these LED bars automatically fit an OCTANORM frame?
No. Confirm mounting space, connectors, optics and power requirements for your own construction. These are independent lightbox sources; frame compatibility requires verification.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send frame dimensions, fabric reference, seam details and supply requirements through Contact us to discuss a trial.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for LED bars for backlit fabric lightboxes around OCTANORM co-lab: system meets fabric? The partner programme combines modular frames and textiles. Partner VISIX also supplies illuminated fabric graphics. Compare independent lightbox LEDs here using your intended fabric and frame.
Which fabric should I test with lightbox LED modules?
Use the actual light-transmitting graphic intended for the illuminated face. Blockout fabric serves a different purpose. Keep the print process, fabric reference and frame dimensions with the sample when comparing LEDs.
How can I check shadows at the edges of a fabric lightbox?
Tension the printed sample in a representative frame. Inspect seams, corners and the full perimeter with the intended LED arrangement. Compare the complete illuminated face before repeating the order.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Do these LED bars automatically fit an OCTANORM frame?
No. Confirm mounting space, connectors, optics and power requirements for your own construction. These are independent lightbox sources; frame compatibility requires verification.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send frame dimensions, fabric reference, seam details and supply requirements through Contact us to discuss a trial.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.