NAB Show brings together media and broadcast exhibitors. This selection is for independent builders of their indoor backlit booth graphics, with camera evaluation before production.
Evaluate the illuminated graphic through the intended camera
Build a representative sample with the actual print, frame depth, LED layout and driver. Record the camera frame rate, shutter and white-balance settings. Review the captured image as well as the graphic by eye; a bright-looking sample alone does not prove the result in a recorded demonstration.
Keep a reference for white-light and dimming trials
Compare the selected fixed-white or dual-CCT option under the same camera settings. If dimming is required, test the proposed driver and control arrangement rather than assuming module compatibility. Save the approved image and component list so that a later order can be checked against the evaluated configuration.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these flicker-free studio fixtures or LED video tiles?
No studio-fixture, video-tile or flicker-free camera-performance claim is made. These modules are internal light sources for independently designed lightboxes. Camera performance must be evaluated with the exact module, driver, dimmer and camera settings.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the indoor-lightbox drawing, print sample, camera settings and driver or control requirements to discuss a model-specific trial.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
NAB Show brings together media and broadcast exhibitors. This selection is for independent builders of their indoor backlit booth graphics, with camera evaluation before production.
Evaluate the illuminated graphic through the intended camera
Build a representative sample with the actual print, frame depth, LED layout and driver. Record the camera frame rate, shutter and white-balance settings. Review the captured image as well as the graphic by eye; a bright-looking sample alone does not prove the result in a recorded demonstration.
Keep a reference for white-light and dimming trials
Compare the selected fixed-white or dual-CCT option under the same camera settings. If dimming is required, test the proposed driver and control arrangement rather than assuming module compatibility. Save the approved image and component list so that a later order can be checked against the evaluated configuration.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these flicker-free studio fixtures or LED video tiles?
No studio-fixture, video-tile or flicker-free camera-performance claim is made. These modules are internal light sources for independently designed lightboxes. Camera performance must be evaluated with the exact module, driver, dimmer and camera settings.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the indoor-lightbox drawing, print sample, camera settings and driver or control requirements to discuss a model-specific trial.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.