Mimaki UV Academy introduces UV print applications. Mimaki’s own product guidance describes multilayer day-and-night graphics on clear media. This collection helps indoor lightbox makers assess the printed face in both viewing states before choosing internal LED modules.
Keep one print reference for both viewing states
Record the artwork, clear media and print-layer construction. Check the unlit appearance under representative ambient lighting, then inspect the same face with the proposed backlight.
Approve the illuminated state as a separate check
Use the intended LED layout and power supply in a representative assembled box. Record the accepted day and night appearances. If the graphic layers or lighting change, repeat both checks on the new sample.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can a stronger white LED create a missing night image?
No. The printed layers determine the graphic effect; internal LEDs provide illumination. Confirm both physically. These are independent lightbox modules, not Mimaki printer parts or UV curing LEDs; equipment compatibility is not claimed.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send box dimensions, face-media reference, day-and-night sample requirements and intended power supply to discuss candidates.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Mimaki UV Academy introduces UV print applications. Mimaki’s own product guidance describes multilayer day-and-night graphics on clear media. This collection helps indoor lightbox makers assess the printed face in both viewing states before choosing internal LED modules.
Keep one print reference for both viewing states
Record the artwork, clear media and print-layer construction. Check the unlit appearance under representative ambient lighting, then inspect the same face with the proposed backlight.
Approve the illuminated state as a separate check
Use the intended LED layout and power supply in a representative assembled box. Record the accepted day and night appearances. If the graphic layers or lighting change, repeat both checks on the new sample.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can a stronger white LED create a missing night image?
No. The printed layers determine the graphic effect; internal LEDs provide illumination. Confirm both physically. These are independent lightbox modules, not Mimaki printer parts or UV curing LEDs; equipment compatibility is not claimed.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send box dimensions, face-media reference, day-and-night sample requirements and intended power supply to discuss candidates.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.