Searching for Marsh Construction Summit Australia lightbox LED modules or LED bars for foyer branding? Compare internal sources for modular printed displays that can be checked before the event build.
What should I test before a quick ballroom-foyer build?
Assemble the actual frame, translucent print, LED layout and compatible external driver off site first. Check face uniformity, connector pinout, polarity and connected load. Record bar positions and label compatible sections so an on-site assembly team can follow the tested design. A fast frame kit does not make a custom LED retrofit plug-and-play.
Should the foyer lightbox and a separate logo share one lighting circuit?
Treat internal graphic backlighting and external logo illumination as separate applications. Do not connect the display LEDs to uplights or an unknown kit harness because they are nearby. Confirm each circuit’s voltage, driver arrangement and permitted load; route cables so frame assembly and access doors do not trap them.
Compare LED lightbox sources
- Linkable LED bar — DC24V; 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° lens; external driver required.
- 7W mini LED bar — DC24V, 200×23×16mm, 770lm, standard 20°×60° lens; verify frame fit and external driver.
- 20W rigid LED bar — DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics; check Molex-family pinout and polarity.
Can I change the number of linked bars when the display layout changes?
Recalculate wattage and check each model’s permitted run, cable rating and voltage drop. The linkable bar allows up to five compatible bars per stated run; this limit does not apply to every product in the collection. Different frame sections or prints require a new optical and wiring check before reuse.
Before ordering
Plan a reachable service point and compatible separate external driver. Get the original system owner’s agreement before modifying an existing lightbox. No fit in a Lumi system, faster installation guarantee or approval for construction-site lighting is implied.
Browse all 26 LED Modules below. Send the foyer display layout, print sample, frame depth and planned preassembly arrangement for a selection enquiry.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Searching for Marsh Construction Summit Australia lightbox LED modules or LED bars for foyer branding? Compare internal sources for modular printed displays that can be checked before the event build.
What should I test before a quick ballroom-foyer build?
Assemble the actual frame, translucent print, LED layout and compatible external driver off site first. Check face uniformity, connector pinout, polarity and connected load. Record bar positions and label compatible sections so an on-site assembly team can follow the tested design. A fast frame kit does not make a custom LED retrofit plug-and-play.
Should the foyer lightbox and a separate logo share one lighting circuit?
Treat internal graphic backlighting and external logo illumination as separate applications. Do not connect the display LEDs to uplights or an unknown kit harness because they are nearby. Confirm each circuit’s voltage, driver arrangement and permitted load; route cables so frame assembly and access doors do not trap them.
Compare LED lightbox sources
- Linkable LED bar — DC24V; 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° lens; external driver required.
- 7W mini LED bar — DC24V, 200×23×16mm, 770lm, standard 20°×60° lens; verify frame fit and external driver.
- 20W rigid LED bar — DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics; check Molex-family pinout and polarity.
Can I change the number of linked bars when the display layout changes?
Recalculate wattage and check each model’s permitted run, cable rating and voltage drop. The linkable bar allows up to five compatible bars per stated run; this limit does not apply to every product in the collection. Different frame sections or prints require a new optical and wiring check before reuse.
Before ordering
Plan a reachable service point and compatible separate external driver. Get the original system owner’s agreement before modifying an existing lightbox. No fit in a Lumi system, faster installation guarantee or approval for construction-site lighting is implied.
Browse all 26 LED Modules below. Send the foyer display layout, print sample, frame depth and planned preassembly arrangement for a selection enquiry.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.