Looking for January Furniture Show lightbox LED modules or JFS brand-panel LED bars? Compare internal sources for compatible indoor brand lightboxes in separate furniture exhibition zones.
Which LED modules suit furniture-show brand lightboxes?
Compare edge-lit and rear-backlight bars using each panel's illuminated dimensions, usable depth, mounting spans and face material. Verify source length, optics and supply compatibility for every zone. A shared stand does not make all frames identical; internal LED bars are components and do not include the lightbox structure or face.
How do I balance lightboxes across separate brand zones?
Test each approved graphic in its intended location and compare the zones from the aisle and meeting areas under the planned stand lighting. Review bright spots, shadows and the relationship between the brand panels and physical furniture. Graphic-lightbox brightness does not establish accurate illumination of upholstery or material samples; arrange and assess that product lighting separately.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I check when the brand supplies its own lightboxes?
Record each frame's dimensions, depth, mounting points, face sample, existing voltage, connectors and service access. Agree who supplies the LEDs and power equipment, who connects the circuits and who signs off the installation. Send those details for source selection before ordering; confirm mechanical compatibility, wiring and venue requirements with the responsible installation team.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the frame and face details for each brand zone to compare sources and plan the electrical handoff.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for January Furniture Show lightbox LED modules or JFS brand-panel LED bars? Compare internal sources for compatible indoor brand lightboxes in separate furniture exhibition zones.
Which LED modules suit furniture-show brand lightboxes?
Compare edge-lit and rear-backlight bars using each panel's illuminated dimensions, usable depth, mounting spans and face material. Verify source length, optics and supply compatibility for every zone. A shared stand does not make all frames identical; internal LED bars are components and do not include the lightbox structure or face.
How do I balance lightboxes across separate brand zones?
Test each approved graphic in its intended location and compare the zones from the aisle and meeting areas under the planned stand lighting. Review bright spots, shadows and the relationship between the brand panels and physical furniture. Graphic-lightbox brightness does not establish accurate illumination of upholstery or material samples; arrange and assess that product lighting separately.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I check when the brand supplies its own lightboxes?
Record each frame's dimensions, depth, mounting points, face sample, existing voltage, connectors and service access. Agree who supplies the LEDs and power equipment, who connects the circuits and who signs off the installation. Send those details for source selection before ordering; confirm mechanical compatibility, wiring and venue requirements with the responsible installation team.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the frame and face details for each brand zone to compare sources and plan the electrical handoff.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.