Looking for Intersolar Europe lightbox LED modules or LED bars for joint-pavilion graphics? Compare internal sources for compatible indoor frames, with a separate specification for each exhibitor panel.
Which LED modules suit joint-pavilion lightboxes?
Compare edge lighting and rear backlighting against each panel’s lit dimensions, usable depth, mounting spans and print material. Check source length, optics and graphic distance. LED bars do not include the frame or printed graphic.
Can different exhibitor lightboxes use the same LED layout?
Do not copy a source layout solely because panels share a pavilion. Different face sizes, depths and materials need separate sample checks. Then coordinate identified power branches and accessible connectors without assuming the panels can share one supply.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What frame and electrical details should I send?
Send a panel-by-panel drawing, lit dimensions, usable depths, mounting spans, print samples, connector photos and supply voltages. Confirm source positions, load and wiring before ordering; keep graphic lighting separate from solar or battery equipment demonstrations.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send the individual lightbox specifications and joint-pavilion power plan to select suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for Intersolar Europe lightbox LED modules or LED bars for joint-pavilion graphics? Compare internal sources for compatible indoor frames, with a separate specification for each exhibitor panel.
Which LED modules suit joint-pavilion lightboxes?
Compare edge lighting and rear backlighting against each panel’s lit dimensions, usable depth, mounting spans and print material. Check source length, optics and graphic distance. LED bars do not include the frame or printed graphic.
Can different exhibitor lightboxes use the same LED layout?
Do not copy a source layout solely because panels share a pavilion. Different face sizes, depths and materials need separate sample checks. Then coordinate identified power branches and accessible connectors without assuming the panels can share one supply.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What frame and electrical details should I send?
Send a panel-by-panel drawing, lit dimensions, usable depths, mounting spans, print samples, connector photos and supply voltages. Confirm source positions, load and wiring before ordering; keep graphic lighting separate from solar or battery equipment demonstrations.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send the individual lightbox specifications and joint-pavilion power plan to select suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.