Building illuminated storage towers for the International Builders’ Show, also called IBS? Compare internal LED bars for static brand graphics, then specify the reception-counter lightboxes separately from software-demo screens.
How many LED bars does an IBS lightbox tower need?
Tower height alone cannot determine LED quantity. Measure each illuminated face, clear depth and mounting space. Include doors, shelves and internal supports in the section drawing so the layout can account for shadows and service access. Test the actual transmitting graphic before approving bar spacing.
Can the reception counter use the tower’s LED layout?
A narrow counter graphic and a tall tower face have different source-to-graphic distances and obstructions. Prepare separate layouts and load calculations. Compare edge-lit sources with rear-backlight sources against the actual section; do not multiply a counter’s bar count by the tower’s height.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these LED modules for the software-demo screens?
No. These bars light static printed graphics inside compatible lightboxes. Monitors, touchscreens and decorative hanging signs need their own equipment. Record each lightbox circuit separately and retain access to its connections after the storage structure is assembled.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all 26 products below. Send labelled tower and counter sections, front-material samples, mounting positions and driver details for a component quote. Identify rented parts before requesting changes; LED bars do not include the tower structure or screens.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Building illuminated storage towers for the International Builders’ Show, also called IBS? Compare internal LED bars for static brand graphics, then specify the reception-counter lightboxes separately from software-demo screens.
How many LED bars does an IBS lightbox tower need?
Tower height alone cannot determine LED quantity. Measure each illuminated face, clear depth and mounting space. Include doors, shelves and internal supports in the section drawing so the layout can account for shadows and service access. Test the actual transmitting graphic before approving bar spacing.
Can the reception counter use the tower’s LED layout?
A narrow counter graphic and a tall tower face have different source-to-graphic distances and obstructions. Prepare separate layouts and load calculations. Compare edge-lit sources with rear-backlight sources against the actual section; do not multiply a counter’s bar count by the tower’s height.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these LED modules for the software-demo screens?
No. These bars light static printed graphics inside compatible lightboxes. Monitors, touchscreens and decorative hanging signs need their own equipment. Record each lightbox circuit separately and retain access to its connections after the storage structure is assembled.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all 26 products below. Send labelled tower and counter sections, front-material samples, mounting positions and driver details for a component quote. Identify rented parts before requesting changes; LED bars do not include the tower structure or screens.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.