Looking for International Biomass Conference or IBCE lightbox LED modules? Compare internal LED bars for fabric graphics in your own exhibition lightbox frame.
Do I need a complete lightbox rental or just LED bars?
A complete display package and an internal LED component purchase have different requirements. If you need a frame, graphics and installation service, confirm that package with its provider. Choose bars here when you are specifying the lighting inside your own frame.
Which LEDs suit a fabric graphic in my own lightbox frame?
Compare edge lighting and rear backlighting using the lit dimensions, clear depth, fabric sample and mounting drawing. A complete rental display description does not establish the source layout or replacement fit for another frame.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What details are needed for an owned-frame LED selection?
Send your frame cross-section, lit dimensions, final fabric print, mounting positions and power and connector labels. Verify voltage, polarity, pinout and the selected bar loads. Keep any charging station, monitor or external spotlight requirements separate from the graphic lighting.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send your own-frame details to review suitable internal bars for the fabric graphic; confirm complete event rentals separately with their provider.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for International Biomass Conference or IBCE lightbox LED modules? Compare internal LED bars for fabric graphics in your own exhibition lightbox frame.
Do I need a complete lightbox rental or just LED bars?
A complete display package and an internal LED component purchase have different requirements. If you need a frame, graphics and installation service, confirm that package with its provider. Choose bars here when you are specifying the lighting inside your own frame.
Which LEDs suit a fabric graphic in my own lightbox frame?
Compare edge lighting and rear backlighting using the lit dimensions, clear depth, fabric sample and mounting drawing. A complete rental display description does not establish the source layout or replacement fit for another frame.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What details are needed for an owned-frame LED selection?
Send your frame cross-section, lit dimensions, final fabric print, mounting positions and power and connector labels. Verify voltage, polarity, pinout and the selected bar loads. Keep any charging station, monitor or external spotlight requirements separate from the graphic lighting.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send your own-frame details to review suitable internal bars for the fabric graphic; confirm complete event rentals separately with their provider.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.