Looking for IGEPA CZ Select lightbox LED modules? The partner event serves print businesses and sign makers. IGEPA CZ’s catalogue describes Brillant Backlit G as glossy and Diamond Backlit SG as semi-gloss translucent polyester film. This guide helps buyers assess an indoor illuminated graphic before choosing its internal light source.
Compare film finishes with one recorded lighting setup
Print representative colour patches, fine text and solid areas on both intended films. Record each film and print recipe, cabinet depth, bar positions, face-to-source distance, LED model, CCT and driver load. Keep viewing distance and room lighting consistent. Examine the unlit face and then the lit face; record glare, readable detail, dark centres and bright edges separately.
Compare internal lightbox LED bars
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Does a glossy backlit film need fewer LED bars than a semi-gloss film?
A finish name does not establish light transmission or the required bar count. Compare the actual printed films in the intended cabinet. Module lumens describe source output, not the brightness measured at the completed graphic.
Should I increase LED power if reflections hide the text?
First compare the unlit and lit faces at the intended viewing angles. Reflected room light and uneven transmitted light are different observations. Test the face finish and viewing conditions before changing the recorded LED arrangement; then approve the revised complete assembly.
What should I send when asking for a backlit film lighting quote?
Send the selected film, sample photos lit and unlit, illuminated dimensions, internal depth and approved bar positions. Confirm voltage, connectors and pack quantity. A compatible external driver is required and not included. Film availability does not imply an on-site demonstration or fit with every frame.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
MasterJet S Brillant Backlit G · MasterJet S Diamond Backlit SG
-
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W/18W LED Module for MODULAP Fabric Lightbox -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
Side-Lit LED Module for MODULAP Systems -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Looking for IGEPA CZ Select lightbox LED modules? The partner event serves print businesses and sign makers. IGEPA CZ’s catalogue describes Brillant Backlit G as glossy and Diamond Backlit SG as semi-gloss translucent polyester film. This guide helps buyers assess an indoor illuminated graphic before choosing its internal light source.
Compare film finishes with one recorded lighting setup
Print representative colour patches, fine text and solid areas on both intended films. Record each film and print recipe, cabinet depth, bar positions, face-to-source distance, LED model, CCT and driver load. Keep viewing distance and room lighting consistent. Examine the unlit face and then the lit face; record glare, readable detail, dark centres and bright edges separately.
Compare internal lightbox LED bars
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Does a glossy backlit film need fewer LED bars than a semi-gloss film?
A finish name does not establish light transmission or the required bar count. Compare the actual printed films in the intended cabinet. Module lumens describe source output, not the brightness measured at the completed graphic.
Should I increase LED power if reflections hide the text?
First compare the unlit and lit faces at the intended viewing angles. Reflected room light and uneven transmitted light are different observations. Test the face finish and viewing conditions before changing the recorded LED arrangement; then approve the revised complete assembly.
What should I send when asking for a backlit film lighting quote?
Send the selected film, sample photos lit and unlit, illuminated dimensions, internal depth and approved bar positions. Confirm voltage, connectors and pack quantity. A compatible external driver is required and not included. Film availability does not imply an on-site demonstration or fit with every frame.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
MasterJet S Brillant Backlit G · MasterJet S Diamond Backlit SG