Sourcing internal lightbox LEDs for an IFT FIRST exhibit that combines printed graphics with digital displays? Start by separating the static backlit graphic from the screen or video system. This collection helps custom exhibit fabricators specify LED bars for translucent printed faces; it does not supply video-wall panels, ingredient-testing instruments or a complete food-show booth.
Separate the printed-lightbox order from the digital display order
Label the display drawing with the static graphic face, digital screen, screen mounts, service opening and each power connection. Specify the printed-lightbox cavity and source orientation independently of the screen dimensions. A screen's brightness setting and input specification are not an LED-module specification. Keep mounts and ventilation paths from occupying the lightbox's usable optical space.
Approve the actual graphic with the screen operating
Build a representative illuminated print sample containing the intended ingredient imagery, fine text and brand colours. Review it with the planned screen content playing, then with the screen dark, using the same viewing position. Record whether the graphic stays legible and whether a nearby screen changes the perceived brightness balance. Adjust the print/source sample before committing to production; a camera image alone cannot approve physical colour matching.
Compare LED lightbox sources
- 20W rigid edge-lit bar: DC24V, 470 × 24 × 16mm including the lens, 2200lm ±10%, 10° × 40° optics. Check its inward light path against the printed-face depth and screen-support clearance.
- Linkable edge-lit bars: DC24V; 212mm/9W, 319mm/14W or 480mm/20W, standard 20° × 60° optics. Compare physical lengths with clear perimeter sections. Maximum five compatible bars per run depends on the actual cable and connector arrangement.
- 7W mini edge-lit bar: DC24V, 200 × 23 × 16mm, 770lm, standard 20° × 60° optics. Compare it for compact graphic sections. Confirm the Molex-family connector pinout and polarity instead of assuming compatibility.
Can these LED modules turn an IFT FIRST printed lightbox into a video display?
No. These light sources illuminate a translucent printed face. Moving images require a separate screen or video display system. If your contractor supplies a complete lit frame, confirm the included source and service responsibility before buying parts. For a custom printed lightbox, choose the source by actual frame geometry, face material and electrical connections.
Should I choose the lightbox LED wattage from the brightness of the adjacent screen?
No. Choose the printed-lightbox source using its dimensions, usable depth, print transmission and tested layout. Review the physical sample alongside the screen at its intended setting to judge the combined presentation. Screen brightness and power consumption do not establish the correct lightbox bar count or driver.
Can I compare an illuminated ingredient graphic using only a digital artwork proof?
A digital proof helps review content and layout, but it does not show how the actual printed face transmits light. Test the intended print with the selected LED model and fixed CCT. Check fine text and colour appearance physically, and retain the approved sample for repeat production.
Before ordering
Confirm illuminated graphic dimensions, usable depth, frame supports, reflective interior and screen clearance. Specify a compatible external DC24V constant-voltage driver for the actual bar load and wiring. Keep the display's power plan distinct from food sampling and demonstration equipment. These components do not imply suitability for food-contact, processing or wet-cleaning areas.
Send a section drawing showing the printed-lightbox face beside the screen, a print sample, clear internal dimensions, connector photos and production quantity. Compare all 26 LED Modules products below for the static graphic assembly. Approve a physical sample with the planned digital content before repeating the layout.
Contact us · Shipping policy · Organizer information · Original display maker case
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
Side-Lit LED Module for MODULAP Systems -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Sourcing internal lightbox LEDs for an IFT FIRST exhibit that combines printed graphics with digital displays? Start by separating the static backlit graphic from the screen or video system. This collection helps custom exhibit fabricators specify LED bars for translucent printed faces; it does not supply video-wall panels, ingredient-testing instruments or a complete food-show booth.
Separate the printed-lightbox order from the digital display order
Label the display drawing with the static graphic face, digital screen, screen mounts, service opening and each power connection. Specify the printed-lightbox cavity and source orientation independently of the screen dimensions. A screen's brightness setting and input specification are not an LED-module specification. Keep mounts and ventilation paths from occupying the lightbox's usable optical space.
Approve the actual graphic with the screen operating
Build a representative illuminated print sample containing the intended ingredient imagery, fine text and brand colours. Review it with the planned screen content playing, then with the screen dark, using the same viewing position. Record whether the graphic stays legible and whether a nearby screen changes the perceived brightness balance. Adjust the print/source sample before committing to production; a camera image alone cannot approve physical colour matching.
Compare LED lightbox sources
- 20W rigid edge-lit bar: DC24V, 470 × 24 × 16mm including the lens, 2200lm ±10%, 10° × 40° optics. Check its inward light path against the printed-face depth and screen-support clearance.
- Linkable edge-lit bars: DC24V; 212mm/9W, 319mm/14W or 480mm/20W, standard 20° × 60° optics. Compare physical lengths with clear perimeter sections. Maximum five compatible bars per run depends on the actual cable and connector arrangement.
- 7W mini edge-lit bar: DC24V, 200 × 23 × 16mm, 770lm, standard 20° × 60° optics. Compare it for compact graphic sections. Confirm the Molex-family connector pinout and polarity instead of assuming compatibility.
Can these LED modules turn an IFT FIRST printed lightbox into a video display?
No. These light sources illuminate a translucent printed face. Moving images require a separate screen or video display system. If your contractor supplies a complete lit frame, confirm the included source and service responsibility before buying parts. For a custom printed lightbox, choose the source by actual frame geometry, face material and electrical connections.
Should I choose the lightbox LED wattage from the brightness of the adjacent screen?
No. Choose the printed-lightbox source using its dimensions, usable depth, print transmission and tested layout. Review the physical sample alongside the screen at its intended setting to judge the combined presentation. Screen brightness and power consumption do not establish the correct lightbox bar count or driver.
Can I compare an illuminated ingredient graphic using only a digital artwork proof?
A digital proof helps review content and layout, but it does not show how the actual printed face transmits light. Test the intended print with the selected LED model and fixed CCT. Check fine text and colour appearance physically, and retain the approved sample for repeat production.
Before ordering
Confirm illuminated graphic dimensions, usable depth, frame supports, reflective interior and screen clearance. Specify a compatible external DC24V constant-voltage driver for the actual bar load and wiring. Keep the display's power plan distinct from food sampling and demonstration equipment. These components do not imply suitability for food-contact, processing or wet-cleaning areas.
Send a section drawing showing the printed-lightbox face beside the screen, a print sample, clear internal dimensions, connector photos and production quantity. Compare all 26 LED Modules products below for the static graphic assembly. Approve a physical sample with the planned digital content before repeating the layout.
Contact us · Shipping policy · Organizer information · Original display maker case
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.