Presenting architectural projects in illuminated panels at Interior Design Show Toronto? A portfolio can combine bright interiors, shadowed spaces and detailed exterior images. This LED Modules selection supports exhibit fabricators comparing internal light sources across that image series. Browse the complete 26-product catalog below.
Approve the image series, not just its brightest photograph
Choose representative printed faces with different highlight, shadow and detail coverage. Test them with the intended face material, backing and lightbox depth under the planned ambient lighting. Compare the actual illuminated images together from the viewing position and record visible source patterns or lost detail. One bright image, or a camera photograph with automatic exposure, cannot establish how the complete portfolio will look.
Keep a separate face record within the shared portfolio plan
Record each image version and face material alongside its LED model, layout, voltage, connector and driver. Recheck a revised image with the approved setup before treating it as equivalent. Different face sizes or depths may need different layouts; matching the LED name alone does not make the panels match. Confirm each selected product's dimensions and electrical requirements before ordering.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a high-CRI LED guarantee faithful architectural image reproduction?
No. Print, translucent material, backing, layout and viewing conditions also affect the result. Evaluate the actual printed assembly; these components do not provide a color-proofing certification or a complete architectural display system.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the portfolio's representative printed images, panel sizes, face materials, usable depths and lighting plan for a component review. Compare all 26 products and retain the per-image sample record for future graphic changes.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Presenting architectural projects in illuminated panels at Interior Design Show Toronto? A portfolio can combine bright interiors, shadowed spaces and detailed exterior images. This LED Modules selection supports exhibit fabricators comparing internal light sources across that image series. Browse the complete 26-product catalog below.
Approve the image series, not just its brightest photograph
Choose representative printed faces with different highlight, shadow and detail coverage. Test them with the intended face material, backing and lightbox depth under the planned ambient lighting. Compare the actual illuminated images together from the viewing position and record visible source patterns or lost detail. One bright image, or a camera photograph with automatic exposure, cannot establish how the complete portfolio will look.
Keep a separate face record within the shared portfolio plan
Record each image version and face material alongside its LED model, layout, voltage, connector and driver. Recheck a revised image with the approved setup before treating it as equivalent. Different face sizes or depths may need different layouts; matching the LED name alone does not make the panels match. Confirm each selected product's dimensions and electrical requirements before ordering.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a high-CRI LED guarantee faithful architectural image reproduction?
No. Print, translucent material, backing, layout and viewing conditions also affect the result. Evaluate the actual printed assembly; these components do not provide a color-proofing certification or a complete architectural display system.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the portfolio's representative printed images, panel sizes, face materials, usable depths and lighting plan for a component review. Compare all 26 products and retain the per-image sample record for future graphic changes.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.