HP’s webinar catalogue includes white-ink application sessions. Its own print guidance identifies backlit applications on translucent and transparent materials. This collection helps lightbox makers retain the printed white-layer reference when comparing internal LED sources.
Record what the white layer represents in the print
Ask the print supplier to identify the white-layer coverage and chosen print mode on the reference sample. Retain that information with the material and artwork identifiers; a white graphic layer is a print decision, not an LED colour-temperature setting.
Keep lighting fixed when comparing white-layer trials
Compare the labelled prints using the same representative box, LED arrangement and power supply. Record the accepted print and lighting combination. If the white-layer construction changes, recheck the assembled result before repeating the order.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Which LED bars should I choose for white-ink backlit graphics?
Compare edge-lit and rear-backlight bars using the box depth and printed material. Test the selected model behind your accepted white-layer print. Printed white ink is separate from LED colour temperature. These are independent lightbox LEDs, not HP printer parts.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send box depth, face-material reference, white-layer sample notes and intended supply to discuss candidates.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
HP’s webinar catalogue includes white-ink application sessions. Its own print guidance identifies backlit applications on translucent and transparent materials. This collection helps lightbox makers retain the printed white-layer reference when comparing internal LED sources.
Record what the white layer represents in the print
Ask the print supplier to identify the white-layer coverage and chosen print mode on the reference sample. Retain that information with the material and artwork identifiers; a white graphic layer is a print decision, not an LED colour-temperature setting.
Keep lighting fixed when comparing white-layer trials
Compare the labelled prints using the same representative box, LED arrangement and power supply. Record the accepted print and lighting combination. If the white-layer construction changes, recheck the assembled result before repeating the order.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Which LED bars should I choose for white-ink backlit graphics?
Compare edge-lit and rear-backlight bars using the box depth and printed material. Test the selected model behind your accepted white-layer print. Printed white ink is separate from LED colour temperature. These are independent lightbox LEDs, not HP printer parts.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send box depth, face-material reference, white-layer sample notes and intended supply to discuss candidates.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.