Searching for Homebuilding & Renovating Show lightbox LED modules or backlighting bars for printed room images? Compare internal sources for exhibitor graphics displayed beside real surface and interior samples.
Which white-light setting suits my printed room image?
Test the actual print under the planned white-light setting and nearby booth lighting. A warm-looking room photograph and a pale surface image can respond differently to the same backlight. The DC24V 12W dual-CCT bar selects two white channels with a compatible separate 3-wire switch or controller. Its 180° output is for direct backlighting behind the graphic; edge-lit bars need their own tested placement.
Can a backlit room image show the true color of a finish?
An illuminated print is a representation, not a color-matching reference for timber, stone, paint or fabric. Keep physical finish samples available for direct inspection under suitable separate lighting. Judge the graphic for image clarity, unwanted color cast and bright or dark areas; changing white-light settings does not prove accurate reproduction of the original material.
Compare LED lightbox sources
- 12W dual-CCT bar — DC24V, 1320lm, 180° direct backlight; separate compatible 3-wire controller or switch and driver required.
- 20W rigid LED bar — DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics; check Molex-family pinout and polarity.
- 7W mini LED bar — DC24V, 200×23×16mm, 770lm, standard 20°×60° lens; verify frame fit and external driver.
Can I reuse the same lightbox for another room graphic?
Reusing the enclosure can be practical, but test the replacement print’s transmission and appearance. Keep the selected CCT pair and controller arrangement on record. Each dual-CCT variant has two stated channels; intermediate blending requires a controller that supports mixing. Edge-lit sources use different optics and wiring, so do not connect them to the dual-CCT circuit without a verified design.
Before ordering
Confirm mounting space, graphic distance and access for print changes. Calculate the connected load and use a compatible external driver. The dual-CCT model also requires a compatible separate 3-wire control. No fit in a supplied lightbox kit or approval for general room lighting is implied.
Browse all 26 LED Modules below. Send the printed room image, physical sample-display plan, usable frame depth and preferred white-light range for a selection enquiry.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Searching for Homebuilding & Renovating Show lightbox LED modules or backlighting bars for printed room images? Compare internal sources for exhibitor graphics displayed beside real surface and interior samples.
Which white-light setting suits my printed room image?
Test the actual print under the planned white-light setting and nearby booth lighting. A warm-looking room photograph and a pale surface image can respond differently to the same backlight. The DC24V 12W dual-CCT bar selects two white channels with a compatible separate 3-wire switch or controller. Its 180° output is for direct backlighting behind the graphic; edge-lit bars need their own tested placement.
Can a backlit room image show the true color of a finish?
An illuminated print is a representation, not a color-matching reference for timber, stone, paint or fabric. Keep physical finish samples available for direct inspection under suitable separate lighting. Judge the graphic for image clarity, unwanted color cast and bright or dark areas; changing white-light settings does not prove accurate reproduction of the original material.
Compare LED lightbox sources
- 12W dual-CCT bar — DC24V, 1320lm, 180° direct backlight; separate compatible 3-wire controller or switch and driver required.
- 20W rigid LED bar — DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics; check Molex-family pinout and polarity.
- 7W mini LED bar — DC24V, 200×23×16mm, 770lm, standard 20°×60° lens; verify frame fit and external driver.
Can I reuse the same lightbox for another room graphic?
Reusing the enclosure can be practical, but test the replacement print’s transmission and appearance. Keep the selected CCT pair and controller arrangement on record. Each dual-CCT variant has two stated channels; intermediate blending requires a controller that supports mixing. Edge-lit sources use different optics and wiring, so do not connect them to the dual-CCT circuit without a verified design.
Before ordering
Confirm mounting space, graphic distance and access for print changes. Calculate the connected load and use a compatible external driver. The dual-CCT model also requires a compatible separate 3-wire control. No fit in a supplied lightbox kit or approval for general room lighting is implied.
Browse all 26 LED Modules below. Send the printed room image, physical sample-display plan, usable frame depth and preferred white-light range for a selection enquiry.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.