Preparing an indoor graphic-lightbox order after a Glantz Open House? Compare all 26 LED Modules products. Turn a materials discussion into clearly identified components and quantities for an independent build.
Define what each quoted unit contains
For every light-source line, record the exact model and whether the quantity counts an individual module, rigid bar or packaged set. Identify the included connector and cable details separately. Keep the external power supply, controller and mounting hardware visible in the component list instead of assuming they come with a light-source price.
Tie the order lines to the reviewed assembly
Match each component to the builder-reviewed lightbox section and wiring layout. Record the supply and control model, polarity and connector pin assignments. If a seller proposes another pack size, bar length or harness, reconcile the quantities and review the affected assembly before accepting the replacement. A similar description or unit price does not establish an equivalent configuration.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a line labelled LED kit mean the lightbox is ready to assemble?
Only the stated contents establish what is supplied. Confirm every required component and its suitability for the proposed indoor graphic lightbox. Our products are internal sources, not a complete cabinet or a guaranteed replacement for the organizer's stocked systems.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the component list with unit definitions, proposed quantities, frame drawing and electrical layout to compare suitable LED modules.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Preparing an indoor graphic-lightbox order after a Glantz Open House? Compare all 26 LED Modules products. Turn a materials discussion into clearly identified components and quantities for an independent build.
Define what each quoted unit contains
For every light-source line, record the exact model and whether the quantity counts an individual module, rigid bar or packaged set. Identify the included connector and cable details separately. Keep the external power supply, controller and mounting hardware visible in the component list instead of assuming they come with a light-source price.
Tie the order lines to the reviewed assembly
Match each component to the builder-reviewed lightbox section and wiring layout. Record the supply and control model, polarity and connector pin assignments. If a seller proposes another pack size, bar length or harness, reconcile the quantities and review the affected assembly before accepting the replacement. A similar description or unit price does not establish an equivalent configuration.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a line labelled LED kit mean the lightbox is ready to assemble?
Only the stated contents establish what is supplied. Confirm every required component and its suitability for the proposed indoor graphic lightbox. Our products are internal sources, not a complete cabinet or a guaranteed replacement for the organizer's stocked systems.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the component list with unit definitions, proposed quantities, frame drawing and electrical layout to compare suitable LED modules.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.