Searching for Fotografiska Stockholm exhibition lightbox LED modules or LED bars for printed black-mask lightboxes? Compare internal sources for illuminated graphic windows surrounded by printed masking.
Which LED modules suit masked exhibition graphic lightboxes?
Compare edge-lit and rear-backlight bars with the full approved mask print, light-window positions, usable depth and mounting spans. Source length, optics and distance to the graphic affect the layout. Verify the actual layer order and existing frame compatibility; source selection does not determine artwork support.
How do I test the light windows and surrounding printed mask?
Test the complete print and approved layer arrangement under the planned exhibition lighting. Inspect the intended light windows for bright or dark areas, then check the surrounding printed mask for unwanted light spill from the actual viewing positions. Mask coverage alone does not establish opacity or uniform illumination; test before fixing source placement.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What mask print, frame and power details should I send?
Send the approved full mask print, window layout, illuminated dimensions, internal depth, mounting spans, source distance, final layer order, viewing positions, service access, connectors and supply. Verify layout and wiring before ordering. Original artwork support, conservation requirements and thermal exposure need separate specialist approval; these LED components do not certify suitability for fragile originals.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your approved mask print and light-window layout to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Searching for Fotografiska Stockholm exhibition lightbox LED modules or LED bars for printed black-mask lightboxes? Compare internal sources for illuminated graphic windows surrounded by printed masking.
Which LED modules suit masked exhibition graphic lightboxes?
Compare edge-lit and rear-backlight bars with the full approved mask print, light-window positions, usable depth and mounting spans. Source length, optics and distance to the graphic affect the layout. Verify the actual layer order and existing frame compatibility; source selection does not determine artwork support.
How do I test the light windows and surrounding printed mask?
Test the complete print and approved layer arrangement under the planned exhibition lighting. Inspect the intended light windows for bright or dark areas, then check the surrounding printed mask for unwanted light spill from the actual viewing positions. Mask coverage alone does not establish opacity or uniform illumination; test before fixing source placement.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What mask print, frame and power details should I send?
Send the approved full mask print, window layout, illuminated dimensions, internal depth, mounting spans, source distance, final layer order, viewing positions, service access, connectors and supply. Verify layout and wiring before ordering. Original artwork support, conservation requirements and thermal exposure need separate specialist approval; these LED components do not certify suitability for fragile originals.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your approved mask print and light-window layout to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.