Fortidia US Connect Partner Expo brings franchise businesses and supplier partners together. For print and sign shops handling different indoor lightbox jobs, build a component stock plan from real project requirements. Browse all LED Modules and record which models suit each planned trial.
Create a job-to-component comparison
For each proposed lightbox, record frame depth, available bar length, mounting, voltage, connectors, optics and control needs. Group jobs only where these requirements match. Keep rear-backlight bars and edge-lit bars distinct, even when their wattages are similar.
Separate workshop stock from project-specific orders
List common verified components, then flag special lengths, connector arrangements or CCT options for individual enquiries. Choose an initial assortment for trial builds rather than assuming one model serves every job. Recheck the exact product options before placing a repeat order.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a shared voltage make one LED bar suitable for every lightbox job?
No. DC24V is only one requirement. Dimensions, source position, optics, mounting, wiring and controls must also suit the complete assembly. A workshop stock plan does not establish compatibility with a franchise supplier’s proprietary system.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the job comparison, proposed stock models, special options, trial observations and required quantities through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Fortidia US Connect Partner Expo brings franchise businesses and supplier partners together. For print and sign shops handling different indoor lightbox jobs, build a component stock plan from real project requirements. Browse all LED Modules and record which models suit each planned trial.
Create a job-to-component comparison
For each proposed lightbox, record frame depth, available bar length, mounting, voltage, connectors, optics and control needs. Group jobs only where these requirements match. Keep rear-backlight bars and edge-lit bars distinct, even when their wattages are similar.
Separate workshop stock from project-specific orders
List common verified components, then flag special lengths, connector arrangements or CCT options for individual enquiries. Choose an initial assortment for trial builds rather than assuming one model serves every job. Recheck the exact product options before placing a repeat order.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a shared voltage make one LED bar suitable for every lightbox job?
No. DC24V is only one requirement. Dimensions, source position, optics, mounting, wiring and controls must also suit the complete assembly. A workshop stock plan does not establish compatibility with a franchise supplier’s proprietary system.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the job comparison, proposed stock models, special options, trial observations and required quantities through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.