Looking for FERMA Forum lightbox LED modules for a branded counter with storage? Compare internal LED bars for the illuminated graphic compartment, with space reserved for documents and service access.
Can a storage counter use the same LED layout as a backwall?
The smaller enclosure needs its own trial. Draw the graphic plane, available depth, shelves and access doors before positioning LEDs. Stored items must not press against wiring or obstruct the light path. Test the final translucent graphic for bright edges, dark patches and shadows from internal partitions.
How can I change the graphic or service LEDs without emptying the whole stand?
Plan a separate access route to the light compartment and compatible external driver. Check mounting clearance and connector reach with the door open. Keep service cables apart from documents, drinks and other stored contents. A lockable cabinet does not itself establish ventilation, spill protection or electrical suitability.
Compare LED lightbox sources
- 7W mini LED bar — DC24V, 200×23×16mm, 770lm, standard 20°×60° lens; verify frame fit and external driver.
- 20W rigid LED bar — DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics; check Molex-family pinout and polarity.
- Linkable LED bar — DC24V; 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° lens; external driver required.
Which measurements should I send for a counter lightbox quotation?
Send the illuminated face dimensions, usable cavity depth, mounting spans, internal shelf layout and access opening. Confirm supply voltage, connector pinout and polarity. Calculate connected wattage, driver headroom and cable rating for the selected variant; long backwall bars may not fit a compact counter.
Before ordering
Use a compatible separate external driver. Check the assembled enclosure under its intended operating conditions. No fit in another supplier’s counter, permission to alter its wiring or certification of the complete cabinet is implied.
Compare all 26 LED Modules below. Send a cabinet section and print sample for a component-selection enquiry before ordering.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Looking for FERMA Forum lightbox LED modules for a branded counter with storage? Compare internal LED bars for the illuminated graphic compartment, with space reserved for documents and service access.
Can a storage counter use the same LED layout as a backwall?
The smaller enclosure needs its own trial. Draw the graphic plane, available depth, shelves and access doors before positioning LEDs. Stored items must not press against wiring or obstruct the light path. Test the final translucent graphic for bright edges, dark patches and shadows from internal partitions.
How can I change the graphic or service LEDs without emptying the whole stand?
Plan a separate access route to the light compartment and compatible external driver. Check mounting clearance and connector reach with the door open. Keep service cables apart from documents, drinks and other stored contents. A lockable cabinet does not itself establish ventilation, spill protection or electrical suitability.
Compare LED lightbox sources
- 7W mini LED bar — DC24V, 200×23×16mm, 770lm, standard 20°×60° lens; verify frame fit and external driver.
- 20W rigid LED bar — DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics; check Molex-family pinout and polarity.
- Linkable LED bar — DC24V; 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° lens; external driver required.
Which measurements should I send for a counter lightbox quotation?
Send the illuminated face dimensions, usable cavity depth, mounting spans, internal shelf layout and access opening. Confirm supply voltage, connector pinout and polarity. Calculate connected wattage, driver headroom and cable rating for the selected variant; long backwall bars may not fit a compact counter.
Before ordering
Use a compatible separate external driver. Check the assembled enclosure under its intended operating conditions. No fit in another supplier’s counter, permission to alter its wiring or certification of the complete cabinet is implied.
Compare all 26 LED Modules below. Send a cabinet section and print sample for a component-selection enquiry before ordering.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.