Farben-Frikell Technologie-Tage brings print and signmaking professionals together for practical demonstrations. The supplier also documents LED modules for lightboxes. For builders comparing internal sources, this collection focuses on recording the basis of a module-count estimate before ordering.
Keep the estimate unit with its source conditions
Record whether a guide expresses quantity per length, per area or per assembly. Keep the source model, lighting method, face material, depth and stated assumptions beside the number. A copied quantity without its unit and conditions is not a usable purchasing specification.
Separate supplier guidelines from your approved order quantity
Treat an application table as an initial guide for its named source, not a transferable count for a different LED bar. Test the proposed layout in a representative lightbox, record the approved installed quantity and list spare parts separately. Recheck the basis whenever the source model or assembly changes.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can a supplier’s module-count table be reused for another brand?
Not automatically. Optics, dimensions and application conditions can differ. Confirm the current product specifications and the tested layout. This collection does not claim compatibility with Farben-Frikell components or that BOOTH LIGHTS participates in its event.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the lightbox dimensions, face material, proposed layout and estimate unit to discuss candidates and verify the basis before ordering.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Farben-Frikell Technologie-Tage brings print and signmaking professionals together for practical demonstrations. The supplier also documents LED modules for lightboxes. For builders comparing internal sources, this collection focuses on recording the basis of a module-count estimate before ordering.
Keep the estimate unit with its source conditions
Record whether a guide expresses quantity per length, per area or per assembly. Keep the source model, lighting method, face material, depth and stated assumptions beside the number. A copied quantity without its unit and conditions is not a usable purchasing specification.
Separate supplier guidelines from your approved order quantity
Treat an application table as an initial guide for its named source, not a transferable count for a different LED bar. Test the proposed layout in a representative lightbox, record the approved installed quantity and list spare parts separately. Recheck the basis whenever the source model or assembly changes.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can a supplier’s module-count table be reused for another brand?
Not automatically. Optics, dimensions and application conditions can differ. Confirm the current product specifications and the tested layout. This collection does not claim compatibility with Farben-Frikell components or that BOOTH LIGHTS participates in its event.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the lightbox dimensions, face material, proposed layout and estimate unit to discuss candidates and verify the basis before ordering.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.