EDPA ACCESS connects exhibit and experiential industry professionals. For teams sourcing components for independently built illuminated displays, this collection helps turn a lightbox enquiry into a purchasing handoff. Compare all LED Modules below.
Create a reusable lightbox specification
Record each design separately: frame section, graphic material, illuminated sides, mounting layout and chosen LED model. Include the exact connector and power arrangement. A shared purchasing template can organize projects, but the same LED layout should not be assumed suitable for different frame dimensions.
Give purchasing an approved sample record
Before ordering production quantities, record the evaluated construction, selected model options and sample observations. Identify which parts are included and which power or control components are separate. If a supplier proposes a different bar, connector or optical option, review that change against the intended lightbox before approving it.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can one approved LED module be substituted across every exhibit lightbox?
Approval applies to the evaluated construction and selected configuration. Different depth, graphic, mounting or wiring can require another review. Supplier participation at EDPA ACCESS does not establish BOOTH LIGHTS affiliation or compatibility with a proprietary display system.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the project specification, candidate models, sample record, separate component needs and purchase quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
EDPA ACCESS connects exhibit and experiential industry professionals. For teams sourcing components for independently built illuminated displays, this collection helps turn a lightbox enquiry into a purchasing handoff. Compare all LED Modules below.
Create a reusable lightbox specification
Record each design separately: frame section, graphic material, illuminated sides, mounting layout and chosen LED model. Include the exact connector and power arrangement. A shared purchasing template can organize projects, but the same LED layout should not be assumed suitable for different frame dimensions.
Give purchasing an approved sample record
Before ordering production quantities, record the evaluated construction, selected model options and sample observations. Identify which parts are included and which power or control components are separate. If a supplier proposes a different bar, connector or optical option, review that change against the intended lightbox before approving it.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can one approved LED module be substituted across every exhibit lightbox?
Approval applies to the evaluated construction and selected configuration. Different depth, graphic, mounting or wiring can require another review. Supplier participation at EDPA ACCESS does not establish BOOTH LIGHTS affiliation or compatibility with a proprietary display system.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the project specification, candidate models, sample record, separate component needs and purchase quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.