Domino Sign describes LED-integration training in France. This independent BOOTH LIGHTS selection helps signmakers choose edge-lit bars for their own lightbox trials. Purchasing these modules does not book a course or imply provider approval.
Choose the light bar before fixing the spacing
Measure the clear mounting run, face-to-bar depth and cable clearance. Compare the 470mm 12W/18W MODULAP format, the 470mm 20W rigid bar and the 200mm 7W compact bar. Use the final graphic and its intended mounting tension when evaluating the assembled lightbox.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Can I copy a point-module spacing chart for an edge-lit bar?
No. These featured bars direct light from the frame edge and are not interchangeable with an array of point modules. Check the selected lens and its orientation relative to the graphic. Test the bar positions in the actual enclosure; matching voltage or length does not validate the layout.
Which beam angle should I compare for my lightbox?
The 12W/18W MODULAP module uses 9°×50° optics, the 20W rigid bar 10°×40°, and the standard 7W compact bar 20°×60°. Record which lens axis faces across the graphic. These are different distributions, not guarantees of uniform illumination at every depth.
Is the highest-wattage bar always the better purchase?
No. Check usable length, measured face appearance, connector fit and total load before selecting wattage. A 200mm bar may fit a short section that a 470mm bar cannot. Retain the approved model, CCT and orientation for repeat orders, and size the separate DC24V supply for the final quantity.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
Side-Lit LED Module for MODULAP Systems -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Domino Sign describes LED-integration training in France. This independent BOOTH LIGHTS selection helps signmakers choose edge-lit bars for their own lightbox trials. Purchasing these modules does not book a course or imply provider approval.
Choose the light bar before fixing the spacing
Measure the clear mounting run, face-to-bar depth and cable clearance. Compare the 470mm 12W/18W MODULAP format, the 470mm 20W rigid bar and the 200mm 7W compact bar. Use the final graphic and its intended mounting tension when evaluating the assembled lightbox.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Can I copy a point-module spacing chart for an edge-lit bar?
No. These featured bars direct light from the frame edge and are not interchangeable with an array of point modules. Check the selected lens and its orientation relative to the graphic. Test the bar positions in the actual enclosure; matching voltage or length does not validate the layout.
Which beam angle should I compare for my lightbox?
The 12W/18W MODULAP module uses 9°×50° optics, the 20W rigid bar 10°×40°, and the standard 7W compact bar 20°×60°. Record which lens axis faces across the graphic. These are different distributions, not guarantees of uniform illumination at every depth.
Is the highest-wattage bar always the better purchase?
No. Check usable length, measured face appearance, connector fit and total load before selecting wattage. A 200mm bar may fit a short section that a 470mm bar cannot. Retain the approved model, CCT and orientation for repeat orders, and size the separate DC24V supply for the final quantity.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.