Searching for Dentistry Show Birmingham lightbox LED modules or LED bars for backlit dental stand graphics? Compare internal sources with the finished marketing image, including its intended light and dark areas.
Which LEDs suit high-contrast dental stand graphics?
Compare edge-lit and rear-backlight layouts with the actual face material, final artwork and usable depth. Test a finished graphic that includes both pale and dark areas before approving the source spacing.
Is a dark part of a backlit image an LED fault?
Not necessarily. Printed artwork can intentionally contain a dark central area. Compare it with the approved artwork and inspect a reference face to distinguish image contrast from unwanted lighting gaps. Do not increase all source power simply to erase intended dark graphics.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What graphic and frame details should I send?
Send the final graphic and intended light/dark areas, face material, dimensions, cavity depth and frame sections, plus mounting, supply and connector details. These modules illuminate exhibit graphics; they are not dental treatment lamps or parts for diagnostic equipment.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your high-contrast graphic and lightbox details to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Searching for Dentistry Show Birmingham lightbox LED modules or LED bars for backlit dental stand graphics? Compare internal sources with the finished marketing image, including its intended light and dark areas.
Which LEDs suit high-contrast dental stand graphics?
Compare edge-lit and rear-backlight layouts with the actual face material, final artwork and usable depth. Test a finished graphic that includes both pale and dark areas before approving the source spacing.
Is a dark part of a backlit image an LED fault?
Not necessarily. Printed artwork can intentionally contain a dark central area. Compare it with the approved artwork and inspect a reference face to distinguish image contrast from unwanted lighting gaps. Do not increase all source power simply to erase intended dark graphics.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What graphic and frame details should I send?
Send the final graphic and intended light/dark areas, face material, dimensions, cavity depth and frame sections, plus mounting, supply and connector details. These modules illuminate exhibit graphics; they are not dental treatment lamps or parts for diagnostic equipment.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your high-contrast graphic and lightbox details to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.