Looking for Comic Con Liverpool printed lightbox LED modules? A supplier discusses LED-backlit fabric displays for this convention. Compare sources for your own specified rigid-frame graphic box, evaluating the artwork under illumination.
How should I test detailed artwork in a booth lightbox?
Use the actual backlit print, including fine lines, small lettering and dark areas. Examine it close up and from the intended aisle position under representative surrounding light. Record which details remain readable before approving the source layout.
Does increasing brightness always make small printed text clearer?
More light alone does not establish legibility. Artwork contrast, print resolution, source uniformity and viewing distance also matter. Compare the same graphic with controlled lighting changes and revise the artwork if its small details remain unclear.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can I fit these rigid bars into the supplier’s inflatable display?
No fit or approved replacement is claimed. Verify mechanical mounting, clearance, input and connectors for your own frame. These modules are internal light sources, not a complete inflatable display or digital screen.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the full-size artwork, intended viewing distance, frame depth and source positions through Contact us to compare components.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for Comic Con Liverpool printed lightbox LED modules? A supplier discusses LED-backlit fabric displays for this convention. Compare sources for your own specified rigid-frame graphic box, evaluating the artwork under illumination.
How should I test detailed artwork in a booth lightbox?
Use the actual backlit print, including fine lines, small lettering and dark areas. Examine it close up and from the intended aisle position under representative surrounding light. Record which details remain readable before approving the source layout.
Does increasing brightness always make small printed text clearer?
More light alone does not establish legibility. Artwork contrast, print resolution, source uniformity and viewing distance also matter. Compare the same graphic with controlled lighting changes and revise the artwork if its small details remain unclear.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can I fit these rigid bars into the supplier’s inflatable display?
No fit or approved replacement is claimed. Verify mechanical mounting, clearance, input and connectors for your own frame. These modules are internal light sources, not a complete inflatable display or digital screen.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the full-size artwork, intended viewing distance, frame depth and source positions through Contact us to compare components.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.